KAESER KOMPRESSOREN M250, Руководство оператора, Страница: 291 / 426

3. Drive the forks fully through the lifting lugs/guides as far as possible.
The forks are fully under the machine.
4. Lift the machine carefully.
12.2.6 Transporting the machine as load
The type of transporting will determine the type of packing and load securing.
Packing and securing methods must be such that, assuming proper handling, the goods arrive in
perfect condition at the destination.
Additional measures must be taken for the transport of machines by sea or air. Please contact
KAESER SERVICE for more information.
Material Chocks
Restraints or timber balks
Straps
Carry out a freight securing:
■ National directives and regulations for securing loads should be followed.
■ Load securing is taken to mean that by full braking or sudden turning the load will not
slide, fall, roll or cause unnecessary noise. Generally accepted technical regulations
should be observed (e.g., in Germany: the VDI Directive 2700 ff).
■ Responsibility for properly secured loads falls on the driver, the vehicle keeper and the
carrier.
Use chocks, restrainers or timber balks for securing the load.
If necessary, use straps across the chassis and the towbar.
Fig. 109 Guys to secure the freight
1.
Straps can damage the bodywork.
Movement during transportation can damage the bodywork.
➤ Do not use straps over the bodywork.
➤ Use straps only over the chassis.
2. Always observe valid accident and safety regulations when transporting.
3. The loads must be secured against rolling, tipping, slipping and falling.
12 Decommissioning, Storage and Transport
12.2 Transport
No.: 9_9570 07 USE
Operator Manual Screw Compressor
M250 SIGMA CONTROL MOBIL
277