manualshive.com logo in svg

KAESER KOMPRESSOREN M250, Руководство оператора, Страница: 170 / 426

Поделиться
Скачать
KAESER KOMPRESSOREN M250 Скачать руководство пользователя страница 170

Material Compressed air

Breathing mask (if necessary)
Water or steam jet blaster

Precondition The machine is placed over a washing station equipped with an oil separator.

The machine is switched off.
The machine has cooled down.
The machine is fully vented, the pressure gauge reads 0 psig.
All compressed air consumers are disconnected and the air outlet valves are open.
The «battery isolating switch» is turned off.

Damage to the machine can be caused by water or steam jets.

Direct water or steam jets can damage or destroy electrical components and indicating in‐

struments.
➤ Cover up electrical components such as the control cabinet, alternator, starter and in‐

struments.

➤ Do not direct water or steam jets at sensitive components such as alternator, starter or

indicating instruments.

➤ Deploy the extension pole of the pressure washer at a distance of at least 1.6 ft and an

approximately 90° angle to the cooler/radiator surface.

➤ Open all doors.

10.6.1  Cleaning the compressor cooler and engine radiator

The compressor oil cooler and engine coolant radiator are combined in a single cooler block.

Fig. 69 Cleaning the compressor cooler and engine radiator

1

Turbo air cooler (engine)

2

Compressor oil cooler

3

Radiator (engine)

4

Direction of impacting water or steam jet

(from outside to inside).

Cooler cleaning

1. Seal off the air intakes of the engine and compressor air filters before starting cleaning.

10 Maintenance

10.6 Cleaning the cooler

156

Operator Manual    Screw Compressor  
M250  SIGMA CONTROL MOBIL

No.: 9_9570 07 USE

Содержание M250











































































































































































































































































































































































































































Отзывы:

Нет отзывов