manualshive.com logo in svg

KAESER KOMPRESSOREN M250, Руководство оператора, Страница: 40 / 426

Поделиться
Скачать
KAESER KOMPRESSOREN M250 Скачать руководство пользователя страница 40

3.5.3  Safe machine operation

The following is information supporting you in the safe handling of the machine during individual

product life phases.

Personal protective equipment

When working on the machine you may be exposed to dangers that can result in accidents with

severe adverse health effects.
➤ Wear protective clothing as necessary.

Suitable protective clothing (examples):
■ Safety work wear
■ Protective gloves
■ Safety boots
■ Eye protection
■ Ear protection

3.5.3.1 Transport

The weight and size of the machine require safety measures during its transport to prevent acci‐

dents.
➤ Allow transport only by personnel trained in safely dealing with motor vehicles and the trans‐

port of goods.

➤ Ensure that no persons are on the machine when transporting.

Transport as trailer

Non-compliance with the basic rules for a safe trailer operation may cause severe accidents during

machine transport.
➤ The maximum permissible load for the towing vehicle coupling and the maximum coupling load

given for the machine must not be exceeded.

➤ Avoid causing a shift in the centre of gravity by an excessive or incorrectly distributed load.
➤ Do not tow in such a way as to impose excessive stress on the machine or chassis.
➤ Adjust towing speed to accommodate ground and weather conditions. This applies particularly

to unpaved roads and when taking curves.

➤ The towbar must be parallel with the ground otherwise towing instability can develop, resulting

in damage to the machine and/or towing vehicle.

➤ Before moving the machine, make sure any security devices (e.g. anti-theft chain) are re‐

leased.

Transport as trailer on public roads

➤ Do not tow machines without service brake on public roads.
➤ Do not tow machines without illumination and signaling equipment on public roads.
➤ Ensure all running gear, including chassis, wheels, brakes, signalling and lighting, is in safe

condition.

➤ The local laws and regulations regarding the use of public roads must be observed.

3

Safety and Responsibility

3.5

Dangers

26

Operator Manual    Screw Compressor  
M250  SIGMA CONTROL MOBIL

No.: 9_9570 07 USE

Содержание M250











































































































































































































































































































































































































































Отзывы:

Нет отзывов