manualshive.com logo in svg

KAESER KOMPRESSOREN M250, Руководство оператора, Страница: 188 / 426

Поделиться
Скачать
KAESER KOMPRESSOREN M250 Скачать руководство пользователя страница 188

Cleaning the condensate drain

1. Unscrew the plug 

5

 and remove the strainer 

7

.

2. Loosen the union nut 

10

 and detach the condensate drain hose 

9

 from the dirt trap

3. Use the small screwdriver to unscrew the nozzle 

11

 from the dirt trap housing.

4. Clean the nozzle, strainer, screw plug, O-ring 

6

 and dirt trap housing 

9

 with cleaning solvent

or spirit.

5. Check the nozzle, strainer and O-ring for wear.

Replace components if they are heavily worn.

6. Place the strainer on the screw plug.
7. Screw in the plug making sure the O-ring seats properly.
8. Screw in the nozzle and re-attach the condensate drain hose.

Putting in operation:

1. Activate the «battery isolating switch».
2. Close the door.

Starting the machine and performing a test run:

1. Switch the machine on and run it in IDLE mode for approx. 5 minutes.
2. Shut down the machine.
3. Wait until the machine has automatically vented.

Pressure gauge reads 0 psig!

4. Open the outlet valves.
5. Open the left-rear door.
6. Check the cyclone separator housing and hose line for leaks.
7. Close the door.

10.11.2  Option dd

Combination filter maintenance

Precondition The machine is switched off.

The machine is standing level.
The machine is fully vented, the pressure gauge reads 0 psig.
All compressed air consumers are disconnected and the air outlet valves are open.

Danger of injury from compressed air!

Filter combination is pressurised during operation. Serious injury can result from loosening

or opening components under pressure.
➤ Wait until the machine has automatically vented (check: pressure gauge reads 0 psig!
➤ De-pressurise the combination filter.

10 Maintenance

10.11 Maintenance for Optional Items

174

Operator Manual    Screw Compressor  
M250  SIGMA CONTROL MOBIL

No.: 9_9570 07 USE

Содержание M250











































































































































































































































































































































































































































Отзывы:

Нет отзывов