manualshive.com logo in svg

KAESER KOMPRESSOREN M250, Руководство оператора, Страница: 84 / 426

Поделиться
Скачать
KAESER KOMPRESSOREN M250 Скачать руководство пользователя страница 84

6.4.3.3 Option rb/rm/rt, rb/rm/rr

Changing the towing eye on a height-adjustable towbar (chassis 8818 lb)

Material Lithium multi-purpose grease (if required)

Fig. 29 Changing the towing eye

1

Fixing bolt

2

Towing eye

3

Split pin

4

Washer

5

Locking lever

6

Bush

7

Circlip

8

Towbar adapter

9

Towbar

10

Locking lever, complete

1. Grip the centre piece at the handle, pull out the split pin at the lower locking lever (at the tow‐

bar) and loosen the locking lever.

2. Set the centre piece to its lowest position (towards the ground).
3. Pull out the splint pin at the upper locking lever (at the towing eye) and loosen the locking lev‐

er.

4. Remove the lock ring at the fixing bolt and unscrew the locking lever, mind the attached wash‐

er and bush.

5. Remove the securing bolt, using light hammer blows if necessary.
6. Remove the towing eye to be removed from between the legs of the centre piece.

The locking teeth on the towbar are corroded and jammed and the towbar height cannot be

set/loosened.
➤ If necessary, free the teeth by jerking the towbar horizontally and vertically. Drive in with

light hammer blows if necessary.

➤ Clean the toothed coupling and smear with water-repellent grease.

1. Place and align the new towing eye between the legs of the centre piece.
2. Push in the securing bolt, using light hammer blows if necessary.
3. Place the washer and loosely screw on the locking lever.
4. Place the bush behind the locking lever and secure with lock ring.
5. Move the the centre piece upwards at the handle, align the towing device and move to the tow‐

ing eye to a horizontal position.

6

Installation

6.4

Adjusting the chassis

70

Operator Manual    Screw Compressor  
M250  SIGMA CONTROL MOBIL

No.: 9_9570 07 USE

Option rb/rm/rt, rb/rm/rr

Содержание M250











































































































































































































































































































































































































































Отзывы:

Нет отзывов