manualshive.com logo in svg

KAESER KOMPRESSOREN M250, Руководство оператора, Страница: 180 / 426

Поделиться
Скачать
KAESER KOMPRESSOREN M250 Скачать руководство пользователя страница 180

Maintaining the parking brake (hand brake lever)

1. Lightly lubricate the pins and adjustment joints.
2. Check free rotation of the parking brake lever.

Maintaining the jockey wheel:

1. Check the jockey wheel for condition, correct function, and movement.

Are individual parts twisted or damaged? Have the jockey wheel replaced.

2. Grease the interior tube of the paid-out jockey wheel.
3. Grease the spindle bearing area (grease nipple).

10.10.2.2 Option rb/rm/rs, rc/ro/rs

Overrun device maintenance

Greasing the overrun device

➤ Pump fresh grease into the nipple until old grease is squeezed out.

Further information See pages 75 and 76 for grease points.

Checking the shock absorber:

1. Loosen the transfer cable one side.
2. Press in the shock absorber against its damping force.

Have the shock absorber replaced by a specialized workshop if:
■ There is little resistance to pushing in,
■ Air has entered the device,
■ There is little resistance to pulling out the shock absorber,
■ Oil leaks out.

10.10.2.3 Option rb/rm/rs, rc/ro/rs, rd/ro/rs

Ball coupling maintenance

Fig. 78 Ball coupling

1

Lubricating points

2

Greasing points

10 Maintenance

10.10 Chassis maintenance

166

Operator Manual    Screw Compressor  
M250  SIGMA CONTROL MOBIL

No.: 9_9570 07 USE

Option rb/rm/rs, rc/ro/rs

Option rb/rm/rs, rc/ro/rs,

rd/ro/rs; rb/rm/rr, rb/rm/rt,

rc/ro/rt, rc/ro/rr

Option rb/rm/rs, rc/ro/rs,

rd/ro/rs

Содержание M250











































































































































































































































































































































































































































Отзывы:

Нет отзывов