KAESER KOMPRESSOREN M250 Скачать руководство пользователя страница 283 | Manualshive

Страница: 283 / 426

KAESER KOMPRESSOREN M250 Скачать руководство пользователя страница 283

Preparing the machine for transport (height-adjustable chassis):

1. Check that the tow bar is adjusted to the correct height. (see also chapter 6.4.1)

Check if:
■ The teeth in the tow bar height adjusting joints are fully engaged.
■ The locking levers are tightened
■ The security pin is fully inserted.

2. Wind the jockey wheel to its uppermost position.

The free jockey wheel automatically moves in transport position (see Ill. 100).

3. Check that the wheels are securely fitted and the tires are in good condition.
4. Check the tire pressures.
5. Connect the cable for the lighting and indicator systems and carry out a function check.
6. Release the parking brake:

(see Ill. 99, figure a).
■ Pull the brake lever a little further on and press the release button.
■ Hold the release button in and push the lever down past the dead point zone.

7. Remove the chocks.

Preparing the machine for transport (fixed-height chassis):

1. Wind the jockey wheel to its uppermost position.

The free jockey wheel automatically moves in transport position (see Ill. 100).

2. Check that the wheels are securely fitted and the tires are in good condition.
3. Check the tire pressures.
4. Connect the cable for the lighting and indicator systems and carry out a function check.
5. Release the parking brake:

(see Ill. 99, figure b).
■ Pull the brake lever a little further on and press the release button.
■ Hold in the release button and push the lever fully down.

6. Remove the chocks.

Preparing the machine for transport (fixed-height chassis, without parking brake):

Fig. 101 Safety signs: Secure the chocks

1.

Missing chocks

Serious injury or death can result from an unsecured machine rolling away.
➤ Secure the chocks in the transport securing device before transporting the machine.
➤ Replace missing chocks immediately.

12 Decommissioning, Storage and Transport

12.2 Transport

No.: 9_9570 07 USE

Operator Manual Screw Compressor
M250 SIGMA CONTROL MOBIL

269

Option rb/rm/rs

Option rc/ro/rs

Option rd/ro/rs

Option rd/ro/rs

«
...
281
282
283
284
285
...
»

Содержание M250











































































































































































































































































































































































































































Отзывы:

Нет отзывов