manualshive.com logo in svg

KAESER KOMPRESSOREN M250, Руководство оператора, Страница: 181 / 426

Поделиться
Скачать
KAESER KOMPRESSOREN M250 Скачать руководство пользователя страница 181

1. Check the ball coupling for correct function and movement.
2. Clean the ball coupling. Grease or oil the ball cup, joints, and bearings.

10.10.3  Brake maintenance

The brake adjusting procedure ensures even wear on the brake linings by adjusting the brake

shoes.

The following points must be observed:
■ Carry out the adjustment procedure on all wheel brakes, one after the other.
■ During adjustment, turn the wheel in the 'forward' direction only.

Material Screwdriver

Wrench
Inspection lamp or torch
Cleaning cloths
Lithium-enriched multi-purpose grease

Precondition The machine is switched off.

1. Jack up the machine and lower it onto supports.
2. Release the parking brake and completely pull out the overrun braking mechanism.

The brake cables are not tensioned.

10.10.3.1 Checking brake system settings

1. Pull up the parking brake to first notch.
2. Turn the wheels in the forward direction.
3. Check that there is the same braking resistance on both wheels.

Brake resistance not even: adjust brake system.

4. Release the parking brake.

10.10.3.2 Checking wheel brake lining wear

Fig. 79 Checking the brake lining thickness

1

Inspection hole

2

Brake linings

1. Remove the plug from the inspection hole.

10 Maintenance

10.10 Chassis maintenance

No.: 9_9570 07 USE

Operator Manual    Screw Compressor  
M250  SIGMA CONTROL MOBIL

167

Содержание M250











































































































































































































































































































































































































































Отзывы:

Нет отзывов