Page 56
Garden Building
Installation Guide
Product Code : TGBv6.1 / November 2011
Drill a 10mm diameter hole through the
centre of the Gazebo Boss (C9031) and
insert the rubber grommet from the gazebo
fixing kit (C9054) into the hole.
Apply a generous bead of silicone to the
inside perimeter of the gazebo boss before
pushing the finial into position.
Locate the nylon rod through the hole in the
top of the gazebo external boss cover
(C9031) and secure in position with the
nylon flange nut fitted to the underside of the
cover.
Insert the threaded bar through the hole in
the aluminium gazebo boss.
Locate the gazebo internal boss cover
(C9032) over the nylon rod and secure in
position by fully tightening the remaining
flange nut.
Trim the end of the nylon rod to ensure that
it finishes flush with the bottom face of the
flange nut.
Push fit the domed cover cap over the
flange nut to finish.