Page 33
Garden Building
Installation Guide
Product Code : TGBv6.1 / November 2011
The eaves beam (A5080) pieces will also
require joining at the corners. These are
joined using two eaves beam connectors
(C9068).
The 135° angled corners on the Octagonal
Garden Building models are joined by
slotting the eaves beam connectors (C9068)
together as shown below and slid into the
channels on the inside of the eaves beam
(A5080).
The 90° angled corners on the Square
Garden Building are joined by slotting the
eaves beam connectors (C9068) together as
shown below and slid into the channels on
the inside of the eaves beam (A5080).
Prior to joining the eaves beam (A5080),
apply a bead of silicone to the mitred cut
faces as shown below.
The eaves beam connectors (C9068) are
fixed into position by use of the 6.35 x 38mm
silver screws (C9132) through the pre-drilled
holes.
When all the eaves beams (A5080) are
assembled on top of the windows, drill
through the eaves beam only with a long
reach 6mm drill at positions which are
100mm from the edge of each window (i.e.
two holes per window position).
Please note: The first holes from each
end of the eaves beam (A5080) should be
positioned at 200mm to ensure that the
6.0 x 120mm yellow screw attaches into
the window frame rather than the corner
post.