Page 26
Garden Building
Installation Guide
Product Code : TGBv6.1 / November 2011
The window is slid along the 150mm sill
(P106) until it is approximately 18mm away
from the first window to be installed.
Take an 18mm inline coupling (A104) and
slide it downwards into the gap between the
two windows until it rests on the 150mm sill
(P106) at the foot of the window.
IMPORTANT: As the 18mm inline coupling
(A104) is being positioned, check that the
legs on the 18mm inline coupling (A104)
interlock with the leg detail on the windows
as shown at the top of the next column.
Adjustable Connectors
If your conservatory model is the Octagonal
Garden Building model all the inline window
couplings will be
adjustable
ones. Similarly,
if your conservatory
model is
the
Rectangular Garden Building the last two
windows in every straight run will be joined
by the same
adjustable
inline couplings
(A107).
These adjustable inline couplings (A107)
allow for adjustment to ensure that the
windows will finish in the correct position at
the end of a run of windows when
connecting to a corner post.
Due to the way that the windows are
manufactured any adjustments you
may
need to undertake will be to
increase
the
18mm gap between two adjacent windows.
After the windows has been assembled
along a straight run of windows, it is
recommended to check the dimension from
corner post (A109/A115) to the centre line of
the previous 18mm inline coupler (A104).