Page 50
Garden Building
Installation Guide
Product Code : TGBv6.1 / November 2011
Square Garden Building Models
Push the roof glazing sheet up into the
universal ridge wings then slowly allow it to
slide back down away from the ridge until it
rests flush with the bottom of the transom
glazing bars.
Allow the roof glazing sheet to gently rest on
to the eaves beam closure (P6056).
Fitting Roof Glazing Sheets around Jack
Rafters
Lay the roof glazing sheet between the jack
rafters and allow it to rest on to the eaves
beam closure.
If positioned correctly there will be an
approximate gap of 8mm between the sides
of the roof glazing sheet and the centre
stems on the jack rafters. The top edge of
the roof glazing sheet will be approximately
5-10mm away from the centre stem on the
Georgian hip bar.
