Page 29
Garden Building
Installation Guide
Product Code : TGBv6.1 / November 2011
Fitting Double Door Outer Frames
The double door outer frame is the last
framee to be fitted.
If already assembled, remove the double
door sashes from the outer frame.
Ensure that the outer frame is positioned
correctly by checking the following;
The flag hinge socket is on the outer face of
the double doors,
and the drain holes are at the bottom of the
frame.
You will also notice that the sill
support blocks (C106) will be absent
from the bottom face of the double door
outer frame.
The windows are permanently fixed together
in the same way as any other window using
the quarter turn buttons (C105) and the
6mm Allen Key (CON046) as described
previously.
The double door outer frame is positioned
like all other windows with the exception that
it is not slid onto the 150mm sill (P106) but
simply placed into position.
Again, check that the inner legs on the outer
frame window detail are notched to allow the
18mm inline couplings (A104) to interlock
with the windows as indicated below.
When the double door outer frame is in
position on top of the 150mm sill (P106) the
gap between the adjacent window and the
door outer frame is approximately 18mm.
Continue to lock the window in place by the
method as previously described.
