Page 48
Garden Building
Installation Guide
Product Code : TGBv6.1 / November 2011
Unpack the roof glazing sheets. If your
glazing material is polycarbonate, it is
important at this stage to note that the
surface which is protected by the
printed
polythene film is the surface that is on the
outside of the conservatory. The print on the
outer film gives details on how to correctly
store your polycarbonate until it is installed.
Each roof glazing sheet is labelled with the
corresponding number on your roof plan.
Please note that if your conservatory roof
has glass roof glazing sheets, some may
require joining with
muntin bars.
Instruction on how to install this is
detailed at the back of this installation
guide.
If not already installed, fit all the eaves beam
closure (P6056) into eaves beam (A5080).
This trim will snap fit into the channels of the
eaves beam between the glazing bars. Do
not remove the glazing tape protective film
at this point.
It is recommended to apply a bead of
silicone to the gap between the eaves beam
closure (P6056) and the glazing bar
undercladding as shown below.
Although the glazing end trims (P6054) may
already be fitted on the polycarbonate
glazing sheets, they will have to be removed
to allow the application a bead of silicone
along the top face of the breather tape
where it will come into contact with the
glazing end trim. Re-attach the end trim
once application is complete.
