Page 63
Garden Building
Installation Guide
Product Code : TGBv6.1 / November 2011
Shoot Bolt Keeps
The shoot bolt keeps have an adjustable top
plate. Loosen the locking screws on each
plate prior to adjustment, ensuring that they
are re-tightened afterwards. On the slave
door, adjust the top section so that this door
is pulled into the frame as tightly as
possible. Adjust the master door keep as
required to ensure that the door latching and
locking is a smooth operation.
Connecting the Restrictor Arm
When both double doors sashes are in
position the restrictor arm assemblies can
be connected. These are found in two parts
that are already attached to the top of both
door sashes and the top inside corners of
the door outer frame.
The restrictor arms are taped into position
for transit. The tape should be removed
prior to installation.
Locate the button on the sliding arm into the
receptor of the fixed restrictor assembly.
Push firmly upwards until the button snaps
into place.
When the restrictor has been located,
tighten the restrictor arm lock by using the
2mm Allen key.
