background image

8x12 Santa Rosa  

Assembly Manual 

with Plywood Roof

Some of the safety and usage measures you may wish to consider include: 
 
-snow load ratings vary by geographical location. If heavy or wet snowfall occurs, it is advisable to sweep the 
snow off the roof(s).  
-if the product is elevated, any structural and building code requirements are solely the customer's  
responsibility, and should be abided by.  
-in high or gusty wind conditions it is advisable to keep the structure securely grounded.  
-have a regular maintenance plan to ensure screws, doors, windows and parts are tight.  

 
 
Customer agrees to hold Outdoor Living Today Partnership and any Authorized Dealers free 
of any liability for improper installation, maintenance and repair.

Toll Free 1-888-658-1658           www.outdoorlivingtoday.com    [email protected]

Page 1

In the event of a missing or broken piece, simply call the Outdoor Living Today Customer 
Support Line @ 1-888-658-1658 within 30 days of the delivery of your purchase. It is our  
commitment to you to courier replacement parts, free of charge, within 10 business days of this 
notification. Replacement parts will not be provided free of charge after the 30 day grace period. 

Thank you for purchasing 
an 8x12 Santa Rosa Garden 
Shed from Outdoor Living 
Today. Please take the time 
to identify all the parts prior 
to assembly.

Safety Points and Other onsiderations: 
Our products are built for use based  
on proper installation and normal 
residential use, on level ground. Please 
follow the instruction manual when 
building your Santa Rosa and retain  
the manual for future maintenance  
purposes.

Version #2.0 

September 1st, 2020

Roof Area:

 113 sqft

Summary of Contents for 8x12 Santa Rosa


















































Reviews: