Juniper JUNOSE 11.2, Руководство по настройке

Страница: 180 / 772

DLCI 16 in sub-interface mlframe-relayTEST.1, status is active
DLCI 17 in sub-interface mlframe-relayTEST.2, status is active
•
Example 2
host1# show frame-relay pvc interface mlframe-relay TEST
PVC information for frame relay DTE interface mlframe-relayTEST
DLCI 16 in sub-interface mlframe-relayTEST.1, status is active
Number of circuit status inactive transitions is 0
Time since creation 00:07:20, last status change 00:07:11
In pkts: 14 Out pkts: 0
In bytes: 420 Out bytes: 0
In FECN pkts: 0 Out FECN pkts: 0
In BECN pkts: 0 Out BECN pkts: 0
In DE pkts: 0 Out DE pkts: 0
Dropped pkts: 14
DLCI 17 in sub-interface mlframe-relayTEST.2, status is active
Number of circuit status inactive transitions is 0
Time since creation 00:07:20, last status change 00:07:11
In pkts: 14 Out pkts: 0
In bytes: 420 Out bytes: 0
In FECN pkts: 0 Out FECN pkts: 0
In BECN pkts: 0 Out BECN pkts: 0
In DE pkts: 0 Out DE pkts: 0
Dropped pkts: 14
•
See show frame-relay pvc.
show frame-relay subinterface
•
Use to display the state of the subinterface.
•
The subinterface can be in one of the following states:
•
Up — Traffic can flow on the interface
•
Offline — Traffic cannot flow because hardware is unavailable
•
Down — Traffic cannot flow because of a problem in the interface at the current
protocol layer
•
LowerLayerDown — Traffic cannot flow because of a problem in an interface at a
lower protocol layer
•
AdministrativelyDown — Traffic cannot flow because of manual administrative
intervention
•
Use the brief keyword to display only the operational status of all configured
subinterfaces.
•
Use the optional delta keyword to specify that baselined statistics are to be shown.
•
Field descriptions
•
Frame relay sub-interface mlframe-relay—Name and subinterface number of the
MLFR bundle in the format
bundle-name.subinterface-number
•
status—State of the subinterface, as follows:
Copyright © 2010, Juniper Networks, Inc. 148
JunosE 11.2.x Link Layer Configuration Guide