Juniper JUNOSE 11.2, Руководство по настройке

Страница: 366 / 772

•
link-status—Indicates the overall status of LCP negotiations, including the following
states: initial (idle), starting (ready to negotiate), authenticate (authenticating),
and network (LCP is up)
•
LCP negotiated options:
•
max-receive-unit—Negotiated maximum receive unit, in octets, for the local and
remote (peer) side of the link
•
max-receive-reconstructed-unit—Negotiated maximum receive reconstructed
unit, in octets, for the local and remote (peer) side of the link
•
authentication—Negotiated authentication method (none, pap, or chap) for the
local and remote (peer) side of the link
•
magic-number—Negotiated magic number for the local and remote (peer) side
of the link
•
pfc—Negotiated pfc (none or enabled) for the local and remote (peer) side of the
link
•
acfc—Negotiated acfc (none or enabled) for the local and remote (peer) side of
the link
NOTE: The command displays a value of “none” for any negotiated option parameters
if the option was not negotiated.
•
LCP Endpoint Discriminator options:
•
local discriminator class—Endpoint discriminator type, format, and address space
for the local system
•
local endpoint discriminator—Endpoint discriminator value for the local system
within the specified class
•
peer discriminator class—Endpoint discriminator type, format, and address space
for the remote system
•
peer endpoint discriminator—Endpoint discriminator value for the remote system
within the specified class
•
LCP protocol statistics:
•
in-keepalive-requests—Number of received keepalive requests (LCP Echo Request)
for the life of the interface (since either system boot or interface creation, whichever
is later)
•
out-keepalive-requests—Number of transmitted keepalive requests for the life of
interface
•
in-keepalive-replies—Number of received keepalive replies for the life of the
interface
Copyright © 2010, Juniper Networks, Inc. 334
JunosE 11.2.x Link Layer Configuration Guide