Juniper JUNOSE 11.2, Руководство по настройке

Страница: 159 / 772

host1# show frame-relay pvc
PVC information for frame relay NNI interface 3/2:1/1
DLCI 101 in sub-interface 3/2:1/1.1, status is active
Number of circuit status inactive transitions is 0
Time since creation 03:27:29, last status change 01:21:29
In pkts: 0 Out pkts: 0
In bytes: 0 Out bytes: 0
In FECN pkts: 0 Out FECN pkts: 0
In BECN pkts: 0 Out BECN pkts: 0
In DE pkts: 0 Out DE pkts: 0
Dropped pkts: 0
DLCI 102 in sub-interface 3/2:1/1.2, status is active
Number of circuit status inactive transitions is 0
Time since creation 03:27:28, last status change 01:21:29
In pkts: 0 Out pkts: 0
In bytes: 0 Out bytes: 0
In FECN pkts: 0 Out FECN pkts: 0
In BECN pkts: 0 Out BECN pkts: 0
In DE pkts: 0 Out DE pkts: 0
Dropped pkts: 0
DLCI 103 in sub-interface 3/2:1/1.3, status is active
Number of circuit status inactive transitions is 0
Time since creation 03:27:28, last status change 01:21:29
In pkts: 0 Out pkts: 0
In bytes: 0 Out bytes: 0
In FECN pkts: 0 Out FECN pkts: 0
In BECN pkts: 0 Out BECN pkts: 0
In DE pkts: 0 Out DE pkts: 0
Dropped pkts: 0
•
See show frame-relay pvc.
show frame-relay subinterface
•
Use to display the state of the Frame Relay subinterface.
•
The subinterface can be in one of the following states:
•
Up—Traffic can flow on the interface
•
Offline—Traffic cannot flow because hardware is unavailable
•
Down—Traffic cannot flow because of a problem in the interface at the current
protocol layer
•
LowerLayerDown—Traffic cannot flow because of a problem in an interface at a
lower protocol layer
•
AdministrativelyDown—Traffic cannot flow because of manual administrative
intervention
•
Use the optional delta keyword to specify that baselined statistics are to be shown.
•
The brief keyword displays only the operational status of all configured subinterfaces.
•
Field descriptions
127 Copyright © 2010, Juniper Networks, Inc.
Chapter 2: Configuring Frame Relay