Juniper JUNOSE 11.2, Руководство по настройке

Страница: 304 / 772

•
Use the no version to disable PPP on an interface.
•
See encapsulation ppp.
interface atm
•
Use to specify a previously configured ATM interface on which you want to configure
PPP.
•
To specify an ATM interface for ERX7xx models, ERX14xx models, and ERX310 router,
use the
slot / port .[ subinterface ] format.
•
slot —Number of the chassis slot
•
port —Port number on the I/O module
•
subinterface —Number of the subinterface in the range 1–2147483647
•
To specify an ATM interface for E120 and E320 routers, use the
slot / adapter / port [. subinterface ] format.
•
slot —Number of the chassis slot
•
adapter —Identifier for the IOA within the E320 chassis, either 0 or 1, where:
•
0 indicates that the IOA is installed in the right IOA bay (E120 router) or the upper
IOA bay (E320 router).
•
1 indicates that the IOA is installed in the left IOA bay (E120 router) or the lower
IOA bay (E320 router).
•
port —Port number on the IOA
•
subinterface —Number of the subinterface in the range 1–2147483647
•
For more information, see “Creating a Basic Configuration” on page 20 in “Configuring
ATM” on page 3.
•
Examples
host1(config-if)# interface atm 9/1.1
host1(config-if)# interface atm 5/0/1.1
•
Use the no version to disable or remove the subinterface or the logical interface.
•
See interface atm.
interface pos
•
Use to specify a previously configured packet over SONET (POS) interface on which
you want to configure PPP.
•
To specify a POS interface for ERX7xx models, ERX14xx models, and ERX310 router,
use the
slot / port .[ subinterface ] format.
•
slot —Number of the chassis slot
•
port —Port number on the I/O module
•
subinterface —Number of the subinterface
Copyright © 2010, Juniper Networks, Inc. 272
JunosE 11.2.x Link Layer Configuration Guide