Juniper JUNOSE 11.2, Руководство по настройке, Страница: 155 / 772

Description: chicago03
Time since last status change 01:20:38
In bytes: 19696 Out bytes: 60744
In frames: 1231 Out frames: 1231
In errors: 0 Out errors: 0
•
See show frame-relay interface.
show frame-relay lmi
•
Use to display configuration and state information and statistics about the LMI for a
multilink Frame Relay, POS, serial, or GRE tunnel interface.
•
Optionally, you can specify an interface using the interface type and specifier. For more
information, see Interface Types and Specifiers in
JunosE Command Reference Guide .
•
Use the optional delta keyword to specify that baselined statistics are to be shown.
•
Field descriptions
•
This command displays both DTE and DCE fields for NNI.
•
For the DTE:
•
Enquiries sent—Total number of LMI status enquiries sent by the DTE on this
interface
•
Full enquiries sent—Total number of LMI full-status enquiries sent by the DTE on
this interface
•
Enquiry responses received—Total number of LMI full- and regular-status responses
received by the DTE on this interface
•
Full enquiry responses received—Total number of LMI full-status responses received
by the DTE on this interface
•
Async updates received—Total number of LMI asynchronous updates received by
the DTE on this interface
•
Unknown messages received—Total number of unknown LMI messages received
on this interface
•
Loss of sequencing detected—Total number of times a loss of sequencing in
received LMI messages was detected by the DTE on this interface
•
No response timeouts—Total number of times a timeout occurred without receiving
a response to an LMI request by the DTE on this interface
•
Last sequence number sent—Last sequence number sent on this interface
•
Last sequence number received—Last sequence number received on this interface
•
For the DCE:
123 Copyright © 2010, Juniper Networks, Inc.
Chapter 2: Configuring Frame Relay