Juniper JUNOSE 11.2, Руководство по настройке

Страница: 400 / 772

•
snmp trap link-status—SNMP trap status: disabled: up, down
•
Encapsulation—Layer 2 encapsulation display; options: ppp, frame-relay ietf, mlppp,
mlframe-relay ietf, hdlc
•
SONET path operational status—State of the SONET path: up, down,
lowerLayerDown
•
time since last status change—Last reported change to the SONET path operational
status
•
SONET operational status—State of SONET operation: up, down, lowerLayerDown
•
time since last status change—Last reported change to the SONET operational
status
•
loopback—Loopback status for the physical interface: enabled, disabled
•
timing source—Clocking source for the physical interface
•
framing type—Framing type for the physical interface
•
Crc type checking—Number of bits used for CRC checking: crc16, crc32, none
•
Hdlc mru—MRU size allowed on the interface
•
Hdlc mtu—MTU size allowed on the interface
•
Hdlc interface speed—Line speed of the interface
•
Hdlc scrambling—Status of payload scrambling on the interface: on, off
•
5 minute input rate—Data rates based on the traffic received in the last five minutes
•
5 minute output rate—Data rates based on the traffic sent in the last five minutes
•
Packets received—Number of incoming packets received on this interface
•
Bytes received—Number of incoming bytes received on this interface
•
Errored packets received—Number of incoming errors received on this interface
•
Packets sent—Number of outgoing packets transmitted on this interface
•
Bytes sent—Number of outgoing bytes transmitted on this interface
•
Errored packets sent—Number of outgoing errors on this interface
•
Example
host1# show interfaces pos 8/0
Packet over SONET interface 8/0 is ifOperUp
Description: houston80 pos interface
snmp trap link-status = disabled
Encapsulation ppp
SONET path operational status: up
time since last status change: 00:20:37
Copyright © 2010, Juniper Networks, Inc. 368
JunosE 11.2.x Link Layer Configuration Guide