manualshive.com logo in svg

Juniper JUNOSE 11.2, Руководство по настройке

Juniper JUNOSE 11.2 - Configuration Manual доступен для бесплатного скачивания на manualshive.com. Этот руководство поможет пользователям разобраться с настройками продукта. Скачайте свой экземпляр сейчас и начните работу с Juniper JUNOSE 11.2!

Поделиться
Скачать
background image

unified ISSU

and Ethernet link-fault management..................237
completion of

resumption of link-fault monitoring.............237

in progress

halt of link-fault management.......................237

Uniform Resource Locator messages.

See

URL

messages

unknown- commands

unknown-destination................................................478
unknown-protocol......................................................478

Unsupported OAM PDUs

viewing............................................................................248

URL (Uniform Resource Locator) messages............402
User-Network Interface.

See

UNI version

V

vbr commands

vbr-nrt.........................................................................46, 56
vbr-rt............................................................................47,  56

VC (virtual channel)

integrity...............................................................................16
per port, ATM....................................................................12

VC (virtual circuit), monitoring..........................................66
VC classes

assigning to

ATM major interfaces..........................................62
dynamic ATM 1483

subinterfaces..................................63, 627, 639

PVCs............................................................................61
static ATM 1483 subinterfaces.........................63

benefits..............................................................................52
configuring........................................................................56
examples

configuration...........................................................56
precedence levels.................................................64

monitoring........................................................................96
overview.............................................................................52
precedence levels..........................................................53
upgrade considerations...............................................53

VC ranges, bulk configuration of

assigning VC classes.................................63, 626, 627
example..........................................................................633
oversubscription..................................................515,  621
overview..........................................................................627
restarting LCP negotiations for PPPoA

clients...........................................................................631

VC subranges

changing

adding to VC range............................................646
changing administrative state......................646
configuring............................................................646
merging..................................................................646
monitoring.............................................................683
overview.................................................................629
removing from VC range.................................646
shortening or expanding.................................646

creating static ATM interfaces in

configuring............................................................650
monitoring.............................................................683
overview.................................................................629

overriding profile assignments......................629, 641
oversubscription..................................................515,  621

vc-class atm command.......................................................60
VCC (virtual channel connection)......................................5
VCD (virtual circuit descriptor).............................387, 440
VCI (virtual channel identifier)..........................5, 387, 441
vendor OUI TLV

component of Information OAM PDU

value of, usage......................................................231

vendor-specific attributes.

See

VSAs

vendor-specific information

and Ethernet OAM link-fault management

Information OAM PDU component..............231

format of, size of

usage........................................................................231

Vendor-specific OAM PDUs

description of................................................................226

versions

UNI (User-Network Interface)............................29, 72

virtual channel connection.

See

VCC

virtual channel identifier.

See

VCI

virtual channel.

See

VC

virtual circuit descriptor.

See

VCD

virtual circuit identifier (VCI) tags

mapped to S-VLAN tags

in ATM-to-Ethernet conversion.....................382

virtual circuit.

See

VC, monitoring

virtual connections, ATM........................................................5
virtual local area networks.

See

VLANs

IPv4 and IPv6 over Dynamic PPPoE....................534

virtual path connection.

See

VPC

virtual path descriptions, assigning..................................41
virtual path identifier (VPI) tags

mapped to C-VLAN tags

in ATM-to-Ethernet conversion.....................382

Copyright © 2010, Juniper Networks, Inc.

738

JunosE 11.2.x Link Layer Configuration Guide

Содержание JUNOSE 11.2





































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOSE 11.2

Crestron CRESTRON-APP-SSTV Operations & Installation Manual preview
CRESTRON-APP-SSTV
Бренд: Crestron Страницы: 28
Adobe 23101764 - Photoshop CS - PC Manual preview
23101764 - Photoshop CS - PC
Бренд: Adobe Страницы: 105
Allied Telesis 86222-27 Release Note preview
86222-27
Бренд: Allied Telesis Страницы: 46
Avaya CPSEE_TSP500 User Manual preview
CPSEE_TSP500
Бренд: Avaya Страницы: 216
Philips SpeechExec Dictation Recorder 1.6.0.0 User Manual preview
SpeechExec Dictation Recorder 1.6.0.0
Бренд: Philips Страницы: 42
Philips RWDV1610B/00 User Manual preview
RWDV1610B/00
Бренд: Philips Страницы: 56
Philips SPEECHEXEC 4.3 Quick Reference Manual preview
SPEECHEXEC 4.3
Бренд: Philips Страницы: 184
Samsung LN32D467E1H Software Manual preview
LN32D467E1H
Бренд: Samsung Страницы: 1
Samsung MZ-7PC064D Specifications preview
MZ-7PC064D
Бренд: Samsung Страницы: 2
Samsung S1A0905-S0B0 Quick Start Manual preview
S1A0905-S0B0
Бренд: Samsung Страницы: 6
Samsung MZ-7PC064D User Manual preview
MZ-7PC064D
Бренд: Samsung Страницы: 59
Broadcom Bluetooth for Microsoft Windows User Manual preview
Bluetooth for Microsoft Windows
Бренд: Broadcom Страницы: 30
Novell ZENWORKS APPLICATION VIRTUALIZATION - V8.0.3 INTEGRATION AND STREAMING GUIDE Manual preview
ZENWORKS APPLICATION VIRTUALIZATION - V8.0.3 INTEGRATION AND STREAMING GUIDE
Бренд: Novell Страницы: 36
Novell ZENworks 10 Configuration Management Upgrade Manual preview
ZENworks 10 Configuration Management
Бренд: Novell Страницы: 32
Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - 07-20-2009 Installation Manual preview
ZENWORKS LINUX MANAGEMENT 7.2 IR2 - 07-20-2009
Бренд: Novell Страницы: 134
Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3 30-03-2010 Reference Manual preview
ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3 30-03-2010
Бренд: Novell Страницы: 200
Novell OPEN WORKGROUP SUITE SMALL BUSINESS EDITION 2.0 Administration Manual preview
OPEN WORKGROUP SUITE SMALL BUSINESS EDITION 2.0
Бренд: Novell Страницы: 77
Novell LINUX ENTERPRISE REAL TIME 10 SP1 Quick Start Manual preview
LINUX ENTERPRISE REAL TIME 10 SP1
Бренд: Novell Страницы: 7

Бренды по названию

Популярные бренды

Загрузить еще бренды