manualshive.com logo in svg

Juniper JUNOSE 11.2, Руководство по настройке

Juniper JUNOSE 11.2 - Configuration Manual доступен для бесплатного скачивания на manualshive.com. Этот руководство поможет пользователям разобраться с настройками продукта. Скачайте свой экземпляр сейчас и начните работу с Juniper JUNOSE 11.2!

Поделиться
Скачать
background image

conventions

notice icons....................................................................xxix
text and syntax..............................................................xxx

CRB (concurrent routing and bridging)

bridge crb command.................................................483
bridge route command.............................................483
configuring routing......................................................483
defined............................................................................469
enabling..........................................................................483

crc command................................................................110,  363
creating an IP profile

tcp adjust-mss.............................................................560

critical event

denoting an unspecified vendor-specific error

condition.....................................................................234

detection of error conditions

in the receive path of the link.........................234

influencing the link state

using the bit in the Flags field........................234

OAM remote failure detection

notified constantly to the local

entity...................................................................234

critical event PDU

received from the remote peer

influencing the link state..................................233
OAM link monitoring..........................................233

CT3/T3-F0 line modules

MLPPP features...........................................................304

customer support.................................................................xxxi

contacting JTAC...........................................................xxxi

D

data communication equipment.

See

DCE

data PVCs, creating................................................................45
data terminal equipment.

See

DTE

data-link connection identifier.

See

DLCI

DCE (data communication equipment)

configuring Frame Relay interface

as...................................................................108, 121, 138

frame-relay lmi commands ....................................108
show frame-relay lmi command ............................121

debugging PPP and PPPoE dynamic

interfaces.............................................................................614

description, interface

ATM 1483 subinterfaces, exporting..........................41
ATM interfaces................................................................40
ATM virtual paths............................................................41
Frame Relay interfaces..............................................108
POS interfaces.....................................................114,  364

sending to AAA................................................................41
serial interfaces..............................................................114

DHCP option 82 field..........................................................658
DHCP relay

with bridged IP.............................................................438

digital subscriber line access multiplexers.

See

DSLAMs

discovery process

See

OAM discovery

Discovery protocol with PPPoE.......................................372
DLCI (data-link connection identifier).........108, 116, 125
documentation set

comments on................................................................xxxi

ds3-scramble command.....................................................29
DSL Forum VSAs

Agent-Circuit-Id

encapsulation type lockout............................523

Agent-Remote-Id

encapsulation type lockout............................523

as criteria for encaspulation type lockout..........523
IWF-Session

dynamic encapsulation type lockout..........523
PPPoE clients with duplicate MAC

addresses..........................................................383

dsl-forum-1 format for PPPoE remote circuit

ID....................................................................................377, 418

DSLAM devices

IWF PPPoE sessions and

multiple DSLAMs connected to an access

concentrator.....................................................392

single DSLAM connected to an access

concentrator.....................................................392

DSLAMs (digital subscriber line access

multiplexers).......................................................................261

DTE (data terminal equipment)

configuring Frame Relay interface

as...................................................................108, 121, 138

frame-relay lmi command.......................................108
show frame-relay lmi command.............................121

Duplicate event notification OAM PDUs

viewing............................................................................248

Copyright © 2010, Juniper Networks, Inc.

714

JunosE 11.2.x Link Layer Configuration Guide

Содержание JUNOSE 11.2





































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOSE 11.2

Canon PowerShot A530 Software User'S Manual preview
PowerShot A530
Бренд: Canon Страницы: 153
Canon PowerShot A420 Software User'S Manual preview
PowerShot A420
Бренд: Canon Страницы: 132
Canon PowerShot A460 Using Manual preview
PowerShot A460
Бренд: Canon Страницы: 135
Canon MultiPASS C50 Software User'S Manual preview
MultiPASS C50
Бренд: Canon Страницы: 198
Canon PowerShot A530 Software Starter Manual preview
PowerShot A530
Бренд: Canon Страницы: 98
3Com IntelliJack NJ200 Supplementary Manual preview
IntelliJack NJ200
Бренд: 3Com Страницы: 14
On-Q/Legrand DA7559 User Manual preview
DA7559
Бренд: On-Q/Legrand Страницы: 14
Inalp Networks SmartWare R2.00 Software Configuration Manual preview
SmartWare R2.00
Бренд: Inalp Networks Страницы: 321
Ricoh Caplio Utility for Macintosh Operation Manual preview
Caplio Utility for Macintosh
Бренд: Ricoh Страницы: 19
Avaya INDeX Agent Assist Supervisor Manual preview
INDeX Agent Assist
Бренд: Avaya Страницы: 12
IBM E16RMLL-I - Tivoli Storage Manager Implementation Manual preview
E16RMLL-I - Tivoli Storage Manager
Бренд: IBM Страницы: 828
Nokia Series 60 Manual preview
Series 60
Бренд: Nokia Страницы: 84
Blackberry MEDIA SYNC Release Note preview
MEDIA SYNC
Бренд: Blackberry Страницы: 9
Blackberry ENHANCED GOOGLE MAIL PLUG IN - LEARN MORE User Manual preview
ENHANCED GOOGLE MAIL PLUG IN - LEARN MORE
Бренд: Blackberry Страницы: 16
Blackberry PRD-10459-003 - Enterprise Server For IBM Lotus Domino Administration Manual preview
PRD-10459-003 - Enterprise Server For IBM Lotus Domino
Бренд: Blackberry Страницы: 420
TRENDnet VIP-L16 - Installation Manual preview
VIP-L16 -
Бренд: TRENDnet Страницы: 21
Oracle Application 9i Configuration Manual preview
Application 9i
Бренд: Oracle Страницы: 140
Autodesk AUTOCAD ELECTRICAL - Brochure preview
AUTOCAD ELECTRICAL -
Бренд: Autodesk Страницы: 16

Бренды по названию

Популярные бренды

Загрузить еще бренды