Juniper JUNOSE 11.2, Руководство по настройке

Страница: 627 / 772

•
See show atm aal5 interface.
show atm subinterface
•
Use to display the current state of all ATM subinterfaces, all ATM subinterfaces
configured on a specified ATM physical interface, or a specific ATM subinterface.
•
To specify an ATM subinterface for ERX7xx models, ERX14xx models, and ERX310
router, use the
slot / port . subinterface format.
•
slot —Number of the chassis slot
•
port —Port number on the I/O module
•
subinterface —Number of the subinterface in the range 1–2147483647
•
To specify an ATM subinterface for E120 and E320 routers, use the
slot / adapter / port . subinterface format.
•
slot —Number of the chassis slot
•
adapter —Identifier for the IOA within the E320 chassis, either 0 or 1, where:
•
0 indicates that the IOA is installed in the right IOA bay (E120 router) or the upper
IOA bay (E320 router).
•
1 indicates that the IOA is installed in the left IOA bay (E120 router) or the lower
IOA bay (E320 router).
•
port —Port number on the IOA
•
subinterface —Number of the subinterface in the range 1–2147483647
•
To display brief summary information for all ATM subinterfaces, or for ATM
subinterfaces configured on a specified ATM physical interface, use the
summary
keyword.
•
To display status information only for ATM subinterfaces with a specific operating
status, use the
status keyword with one of the following status values. (See the Status
field description for an explanation of these values.)
•
dormant
•
dormantLockout
•
down
•
lowerLayerDown
•
notPresent
•
up
•
To display the current state of an ATM subinterface created on the PVC with the
specified VPI and VCI values, use the
atm slot / port / vpi / vci format (for ERX7xx models,
ERX14xx models, and ERX310 router) or the slot/adapter/port/vpi/vci format (for E120
and E320 routers) to identify the ATM subinterface (Example 5).
595 Copyright © 2010, Juniper Networks, Inc.
Chapter 17: Configuring Dynamic Interfaces