Cisco PVDM2 24DM - Digital Modem Module Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 48

background image

Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

© 2006, 2007, 2008 Cisco Systems, Inc. All rights reserved.

Cisco PVDM2-12DM, PVDM2-24DM, and
PVDM2-36DM Digital Modem Packet Voice Data
Modules

First Published: June 19, 2006
Last Updated: July 11, 2008

The Cisco digital modem packet voice data modules (Cisco PVDMs), type 2 (Cisco PVDM2s), are
high-density PVDMs containing 12, 24, or 36 digital modems. These modems provide direct digital
connection to Integrated Services Digital Network (ISDN) Primary Rate Interface (PRI) channels, to
Basic Rate Interface (BRI) channels, and to channel associated signaling (CAS) digital trunk lines. The
PVDM2s are installed in Cisco 2800 series and Cisco 3800 series integrated services routers.

Finding Feature Information in This Module

Your Cisco IOS software release may not support all of the features documented in this module. To reach
links to specific feature documentation in this module and to see a list of the releases in which each feature is
supported, use the

“Feature Information for Digital Modem PVDM2s” section on page 47

.

Finding Support Information for Platforms and Cisco IOS Software Images

Use Cisco Feature Navigator to find information about platform support and Cisco IOS and software image
support. To access Cisco Feature Navigator, go to

<http://www.cisco.com/go/cfn>

. An account on Cisco.com

is not required.

Contents

•

Prerequisites for Cisco Digital Modem PVDM2s, page 2

•

Restrictions for Cisco Digital Modem PVDM2s, page 3

•

Information About Cisco Digital Modem PVDM2s, page 4

•

How to Configure Digital Modem PVDM2s, page 4

•

Configuration Examples for Digital Modem PVDM2s, page 22

•

Additional References, page 25

1
2
3
...
»

Содержание PVDM2 24DM - Digital Modem Module

















































Отзывы:

Нет отзывов

Похожие инструкции для PVDM2 24DM - Digital Modem Module

CORPORATE SUITE

Бренд: KAPERSKY Страницы: 36

DocuColor 45054549

Бренд: Xerox Страницы: 30

Бренд: RTS Страницы: 51

E02D1LL-E - Rational Rose Enterprise

Бренд: IBM Страницы: 46

Бренд: AMX Страницы: 24

AUTOCAD PANDID 2011 - SYSTEM REQUIREMENTS

Бренд: Autodesk Страницы: 2

Бренд: Autodesk Страницы: 6

Бренд: Autodesk Страницы: 62

466B1-05A761-1304 - AutoCAD Inventor Simulation Suite 2010

Бренд: Autodesk Страницы: 84

22906-010000-9325 - UPG FROM AUTOCAD 2000I-NET BUMP

Бренд: Autodesk Страницы: 104

QConvergeConsole CLI 2400 Series

Бренд: Qlogic Страницы: 366

Бренд: MACROMEDIA Страницы: 358

Бренд: Xerox Страницы: 308

Tivoli and Cisco

Бренд: IBM Страницы: 516

Бренд: Xerox Страницы: 378

Бренд: Campbell Страницы: 24

Бренд: Xerox Страницы: 267

Бренд: Waves Страницы: 17

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды