Juniper JUNOSE 11.0.X MULTICAST ROUTING, Руководство по настройке

Страница: 85 / 788

■
Use to specify the virtual router parameter for a user entry in the local user
database. The subscriber is assigned to the operational virtual router only if the
default virtual router performs the authentication.
■
If authentication is performed by a non-default virtual router, then the subscriber
is assigned to the same virtual router that performs authentication, regardless
of this parameter setting.
■
Example
host1(config-local-user)# operational-virtual-router boston2
■
Use the no version to delete the operational virtual router parameter from the
user entry in the local user database.
■
See operational-virtual-router
password
■
Use to add a password to a user entry in the local user database. The password
is used to authenticate a subscriber, and is encrypted by means of a two-way
encryption algorithm.
NOTE: CHAP authentication requires that passwords and secrets be stored in clear
text or use two-way encryption. Two-way encryption is not supported for the secret
command. Therefore, use the password command if you want to enable encryption
for subscribers that use CHAP authentication.
■
The new password replaces any current password or secret.
■
Specify one of the following encryption algorithms, followed by the password:
■
0—An unencrypted password; this is the default
■
8—A two-way encrypted password
■
Example
host1(config-local-user)# password 0 myPassword
■
Use the no version to delete the password or secret from the user entry in the
local user database.
■
See password
secret
Configuring Local Authentication Servers
■ 45
Chapter 1: Configuring Remote Access