manualshive.com logo in svg

Juniper JUNOSE 11.0.X MULTICAST ROUTING, Руководство по настройке

Конфигурационный руководство для маршрутизации сети с мультикастом Juniper JUNOSE 11.0.X предоставляет пользовательские руководства для настройки. Вы можете скачать его бесплатно с нашего сайта. Узнайте как настроить подписку на manualshive.com!

Поделиться
Скачать
background image

are applied to the secondary input stage. The IPv4 and IPv6 policies for voice-over-IP
traffic leaving the IPv4 and IPv6 interfaces respectively are applied to the output
stage. Statistics collection is enabled for the policies referenced in the service macro
using the 

statistics enabled

 keyword in the command used for policy attachment

in the profile. The 

merge

 keyword enables merging of multiple policies to form a

single policy.

The 

<# env.setResult("activate-profile", profileName) #>

 command specifies the

interface profile to be used on activation of the interface. After the subscriber service
session is activated, the policies defined in the interface profile are applied to both
IPv4 and IPv6 interfaces. The elements in the profile to be attached to the interfaces
are determined by the type of the interface.

The 

<# env.setResult("service-interface-type", "ipv4-ipv6") #>

 command

configures the service macro to be used for IPv4 and IPv6 interfaces in a dual stack.
The profile identifier returned from the activate-profile object will be applied to both
IPv4 and IPv6 interfaces.

The service definition macro is configured to collect input and output statistics
associated with external parent groups in a hierarchical policy for IPv4 and IPv6
subscribers as follows:

<# env.setResult("secondary-input-stat-epg", "vb-v4v6-"$ uid $"-in v4v6-"$ uid $"")

#>

<# env.setResult("output-stat-epg", "vb-v4v6-"$ uid $"-out v4v6-"$ uid $"") #>

The <# env.setResult("secondary-input-stat-epg", "vb-v4v6-"$ uid $"-in v4v6-"$ uid
$"") #> command specifies that Service Manager track statistics associated with the
external parent group named vb-v4v6-in and the corresponding hierarchical policy
named v4v6, and that this external parent group is associated with the policy that
is attached at the input stage.

The 

<# env.setResult("output-stat-epg", "vb-v4v6-"$ uid $"-out v4v6-"$ uid $"")

#>

 command specifies that Service Manager track the output statistics associated

with the external parent group named vb-v4v6-out and the corresponding hierarchical
policy named v4v6, which is associated with the policy attached at the output stage.

The input and output statistics associated with the external parent group are collected
and forwarded to the Service Manager to be displayed in the Acct-Stop and
Interim-Acct messages.

If you use the 

secondary-intput-stat-clacl

 and 

output-stat-clacl

 objects in the service

macro to track Service Manager statistics, the values returned in the output of the

show service-management

 command do not accurately reflect the packets that are

rate-limited. In this case, although some of the packets that were classified by the
classifier lists are dropped by the rate-limiter on the external parent group, the Service
Manager statistics collection application counts all the packets that were classified
without excluding those that were dropped by the rate limiter. As a result, the values
returned by the 

output-stat-clacl

 and 

secondary-input-stat-clacl

 objects represent

more packets than those sent to the subscriber and core interfaces respectively.

Using the macro that has been described here, you can configure the following
combined service, for example:

Service Definition Examples

■

699

Chapter 27: Configuring Service Manager

Содержание JUNOSE 11.0.X MULTICAST ROUTING





















































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOSE 11.0.X MULTICAST ROUTING

Panasonic Avccam AG-AF100A Series Manual preview
Avccam AG-AF100A Series
Бренд: Panasonic Страницы: 19
Canon PowerShot A590 IS Software User'S Manual preview
PowerShot A590 IS
Бренд: Canon Страницы: 49
IBM ZVSE PARALLEL ACCESS Manual preview
ZVSE PARALLEL ACCESS
Бренд: IBM Страницы: 10
MACROMEDIA BREEZE 5 Integration Manual preview
BREEZE 5
Бренд: MACROMEDIA Страницы: 232
Cisco 2950C-24 - Catalyst Switch - Stackable Datasheet preview
2950C-24 - Catalyst Switch - Stackable
Бренд: Cisco Страницы: 18
Cisco CONFERENCING EXTENSIONS - ADMINISTRATOR GUIDE FOR MICROSOFT EXCHANGE Administrator'S Manual preview
CONFERENCING EXTENSIONS - ADMINISTRATOR GUIDE FOR MICROSOFT EXCHANGE
Бренд: Cisco Страницы: 61
Cisco Cisco mds 9124 - fabric switch Datasheet preview
Cisco mds 9124 - fabric switch
Бренд: Cisco Страницы: 9
Cisco CISCO1811 End User Instructions preview
CISCO1811
Бренд: Cisco Страницы: 16
Cisco Cisco MDS 9020 - Fabric Switch Configuration Manual preview
Cisco MDS 9020 - Fabric Switch
Бренд: Cisco Страницы: 22
Cisco Catalyst X6816 Datasheet preview
Catalyst X6816
Бренд: Cisco Страницы: 13
Cisco Cisco mds 9124 - fabric switch Specifications preview
Cisco mds 9124 - fabric switch
Бренд: Cisco Страницы: 3
Cisco DCNM Configuration preview
DCNM
Бренд: Cisco Страницы: 7
Cisco GEM318P User Manual preview
GEM318P
Бренд: Cisco Страницы: 74
Cisco Craft Works Interface Quick Start Manual preview
Craft Works Interface
Бренд: Cisco Страницы: 32
Cisco Catalyst Series Switch 2940 Hardware Installation Manual preview
Catalyst Series Switch 2940
Бренд: Cisco Страницы: 82
Cisco Catalyst Series Switch 2940 Regulatory Compliance And Safety Information Manual preview
Catalyst Series Switch 2940
Бренд: Cisco Страницы: 28
Cisco 11.0 BT Release Notes preview
11.0 BT
Бренд: Cisco Страницы: 58
Cisco CCNA NETWORK SIMULATOR Manual preview
CCNA NETWORK SIMULATOR
Бренд: Cisco Страницы: 88

Бренды по названию

Популярные бренды

Загрузить еще бренды