manualshive.com logo in svg

Juniper JUNOSE 11.0.X MULTICAST ROUTING, Руководство по настройке

Конфигурационный руководство для маршрутизации сети с мультикастом Juniper JUNOSE 11.0.X предоставляет пользовательские руководства для настройки. Вы можете скачать его бесплатно с нашего сайта. Узнайте как настроить подписку на manualshive.com!

Поделиться
Скачать
background image

You can use the 

service-interface-type

 object in the service definition macro file to

specify whether a service must be defined for IPv4 or IPv6. Configuring the
service-interface-type object is not mandatory if a service is required only for IPv4
or L2TP subscribers. However, you must specify the service-interface-type object
when a service is required for IPv6 subscribers or IPv4 and IPv6 subscribers in a dual
stack. After you create a new service definition file with the service-interface-type
object and install it on the router, the Service Manager determines whether a service
must be tagged as IPv4, IPv6, or a combination of the two by parsing the objects
passed using the macro environment command, 

env.setResult

. The

service-interface-type object can be configured with one of the following values:

■

ipv4—Specifies that the service session profile must be applied to IPv4 interfaces
only. This object is optional only when IPv4 or L2TP subscribers are in a network.

■

l2tp—Specifies that the service session profile must be applied to L2TP interfaces.
This object is optional only when IPv4 or L2TP subscribers are in a network.

■

ipv4-ipv6—Specifies that the service session profile must be applied to both IPv4
and IPv6 interfaces in a dual stack. You must configure this object when IPv6
subscribers or IPv4/IPv6 subscribers in a dual stack are in a network.

■

ipv6—Specifies that the service session profile must be applied to IPv6 interfaces
only. You must configure this object when IPv6 subscribers or IPv4 and IPv6
subscribers in a dual stack are in a network.

When you create the service definition, include the following service attribute in the
service definition if you want the service to be defined for IPv4 interfaces only. The
profile identifier returned from the activate-profile object is applied to IPv4 interfaces.

<# env.setResult("service-interface-type", ipv4 ) #>

To configure a service macro to be used for IPv6 interfaces only, specify the following
object in the macro definition file. The profile identifier returned from the
activate-profile object is applied to IPv6 interfaces.

<# env.setResult("service-interface-type", ipv6 ) #>

To configure a service macro to be used for IPv4 and IPv6 interfaces in a dual stack,
specify the following object in the macro definition file. The profile identifier returned
from the activate-profile object is applied to both IPv4 and IPv6 interfaces.

<# env.setResult("service-interface-type", ipv4-ipv6 ) #>

Activation and Deactivation of IPv4 and IPv6 Services in a Dual Stack

You can configure IPv4 and IPv6 services in a dual stack either as independent
services or as a combined service. The following sections describe the two types of
configurations and their behavior when they are activated and deactivated.

Independent IPv4 and IPv6 Services in a Dual Stack

To configure separate services for IPv4 and IPv6 interfaces you must create and
install separate service definitions on the router. For example, you can create a
service definition called iponeV4 to be used for IPv4 traffic and service definition

664

■

Activation and Deactivation of IPv4 and IPv6 Services in a Dual Stack

JUNOSe 11.0.x Broadband Access Configuration Guide

Содержание JUNOSE 11.0.X MULTICAST ROUTING





















































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOSE 11.0.X MULTICAST ROUTING

Extreme Networks ExtremeWare Enterprise Manager Installation And User Manual preview
ExtremeWare Enterprise Manager
Бренд: Extreme Networks Страницы: 264
Campbell PC208 Instruction Manual preview
PC208
Бренд: Campbell Страницы: 133
Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1 Installation Manual preview
NETWORK AND SECURITY MANAGER 2010.4 - REV1
Бренд: Juniper Страницы: 244
Dragon Systems DRAGON NATURALLYSPEAKING ESSENTIALS Quick Start Manual preview
DRAGON NATURALLYSPEAKING ESSENTIALS
Бренд: Dragon Systems Страницы: 26
NeatWorks NeatWorks For Mac Using Manual preview
NeatWorks For Mac
Бренд: NeatWorks Страницы: 33
FARONICS DEVICE FILTER MAC Manual preview
DEVICE FILTER MAC
Бренд: FARONICS Страницы: 30
Genius HyperMedia Center Manual preview
HyperMedia Center
Бренд: Genius Страницы: 12
EVGA PCoIP Technology User Manual preview
PCoIP Technology
Бренд: EVGA Страницы: 27
Red Hat APPLICATION STACK 1.4 RELEASE Release Note preview
APPLICATION STACK 1.4 RELEASE
Бренд: Red Hat Страницы: 22
Intel Application Accelerator RAID Edition User Manual preview
Application Accelerator RAID Edition
Бренд: Intel Страницы: 85
AMX APWeb Instruction Manual preview
APWeb
Бренд: AMX Страницы: 34
GRASS VALLEY KAYAK HD Installation Planning Manual preview
KAYAK HD
Бренд: GRASS VALLEY Страницы: 60
Altigen AltiSupervisor Manual preview
AltiSupervisor
Бренд: Altigen Страницы: 34
Sun Microsystems Solaris 7 User Manual preview
Solaris 7
Бренд: Sun Microsystems Страницы: 24
Genius NAVIGATOR 380 - Quick Start Manual preview
NAVIGATOR 380 -
Бренд: Genius Страницы: 26
Bay Networks Gateway Routing Manager Software Manual preview
Gateway Routing Manager
Бренд: Bay Networks Страницы: 20
Bay Networks RADIUS Reference Manual preview
RADIUS
Бренд: Bay Networks Страницы: 58
AAS Tassman User Manual preview
Tassman
Бренд: AAS Страницы: 177

Бренды по названию

Популярные бренды

Загрузить еще бренды