manualshive.com logo in svg

Juniper JUNOSE 11.0.X MULTICAST ROUTING, Руководство по настройке

Конфигурационный руководство для маршрутизации сети с мультикастом Juniper JUNOSE 11.0.X предоставляет пользовательские руководства для настройки. Вы можете скачать его бесплатно с нашего сайта. Узнайте как настроить подписку на manualshive.com!

Поделиться
Скачать
background image

Use a RADIUS CoA-Request message and the new service definition to create
the mutex service. The new service is considered a mutex service because it
belongs to a mutex group.

Service Manager activates the new service and deactivates any existing active
service that is a member of the same mutex group as the new service.

3.

(Optional) Verify the status of the new service.

host1# 

show service-management subscriber-session [email protected] interface

 ip 192.168.0.1

User Name: [email protected], Interface: ip 192.168.0.1
 Id: 1
 Owner: AAA 4194326
 Non-volatile: False
 State: Active
 ServiceSessions:
       Name             mutex  Owner/Id     State              Operation
----------------------- -----  ----------- ------------------  ---------
tiered(2000000,3000000)  12   AAA 4194326  ConfigApplySuccess  Activate
       Name             Non-volatile
----------------------- ------------
tiered(2000000,3000000)   False

Combined and Independent IPv4 and IPv6 Services in a Dual Stack Overview

Internet Protocol version 6 (IPv6) is designed to enhance IP addressing and maintain
other IPv4 functions that work well. Organizations worldwide are developing new
applications to take advantage of the many feature enhancements within IPv6 to
help bring back end-to-end controlled communications across a transparent network
infrastructure. To ensure optimum performance, such applications implement a
dual-stack architecture in which IPv4 and IPv6 protocols share a common transport
and framing layer.

A dual-stack implementation supports both IPv4 and IPv6 hosts to help provide a
smooth transition to all parts of a enterprise network. With this flexible method of
implementation, providers can carry IPv6 traffic over their existing core networks
and customers can roll out IPv6 to more sites.

The PPP link between the customer premises equipment (CPE) and the provider
edge (PE) device or E Series router equipment might require both IPv4 and IPv6
protocols for transmission of data. Such networks require that PE devices run a dual
stack of IPv4 and IPv6 services. In this release, the Service Manager application on
the E Series router supports authentication, service selection, and service activation
and deactivation to subscribers for both IPv4 and IPv6 protocols in a dual stack
configuration.

You can configure services in a dual stack for IPv4 and IPv6 either independently or
as a single entity. Service Manager only tracks JUNOSe objects that are passed back
in the env.setResult method when a service definition is executed. In an IPv6
environment, you must modify the service definition macro file to include the objects
that the Service Manager requires to categorize a service as IPv4, IPv6, or a
combination of both IPv4 and IPv6.

Combined and Independent IPv4 and IPv6 Services in a Dual Stack Overview

■

663

Chapter 27: Configuring Service Manager

Содержание JUNOSE 11.0.X MULTICAST ROUTING





















































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOSE 11.0.X MULTICAST ROUTING

Alcatel-Lucent AUTOMATED MESSAGE DELIVERY SYSTEM 5.0 Quick Start Manual preview
AUTOMATED MESSAGE DELIVERY SYSTEM 5.0
Бренд: Alcatel-Lucent Страницы: 4
IBM PERFORMANCE MANAGEMENT FOR POWER SYSTEMS Getting Started Manual preview
PERFORMANCE MANAGEMENT FOR POWER SYSTEMS
Бренд: IBM Страницы: 12
Brocade Communications Systems Brocade 300 Release Notes preview
Brocade 300
Бренд: Brocade Communications Systems Страницы: 41
NETGEAR 7200 Series User Manual preview
7200 Series
Бренд: NETGEAR Страницы: 282
Arturia Prophet V User Manual preview
Prophet V
Бренд: Arturia Страницы: 117
Garmin Pilot for Android User Manual preview
Pilot for Android
Бренд: Garmin Страницы: 150
nordic edge ASA 5500 Installation Manual preview
ASA 5500
Бренд: nordic edge Страницы: 49
Unibrain API-810 User Manual preview
API-810
Бренд: Unibrain Страницы: 77
F-SECURE PSB - ADMINISTRATORS GUIDE FOR RESELLERS Manual preview
PSB - ADMINISTRATORS GUIDE FOR RESELLERS
Бренд: F-SECURE Страницы: 48
Yamaha RS7000 Ver.1.2 Addendum preview
RS7000 Ver.1.2
Бренд: Yamaha Страницы: 4
MACROMEDIA DIRECTOR MX 2004-GETTING STARTED WITH... Getting Started preview
DIRECTOR MX 2004-GETTING STARTED WITH...
Бренд: MACROMEDIA Страницы: 68
JDS Uniphase T-BERD 8000 Introducing preview
T-BERD 8000
Бренд: JDS Uniphase Страницы: 2
Rane SIXTY-EIGHT Quick Start Manual preview
SIXTY-EIGHT
Бренд: Rane Страницы: 8
Xerox SCAN TO PC DESKTOP 10 Brochure preview
SCAN TO PC DESKTOP 10
Бренд: Xerox Страницы: 4
Lenovo THINKPAD T40P Manual preview
THINKPAD T40P
Бренд: Lenovo Страницы: 100
Lenovo THINKPAD T41 Setup Manual preview
THINKPAD T41
Бренд: Lenovo Страницы: 6
Epson PowerLite Home Cinema 8345 Brochure preview
PowerLite Home Cinema 8345
Бренд: Epson Страницы: 4
TC Electronic PowerCore 01 Manual preview
PowerCore 01
Бренд: TC Electronic Страницы: 9

Бренды по названию

Популярные бренды

Загрузить еще бренды