manualshive.com logo in svg

Juniper JUNOSE 11.0.X MULTICAST ROUTING, Руководство по настройке

Конфигурационный руководство для маршрутизации сети с мультикастом Juniper JUNOSE 11.0.X предоставляет пользовательские руководства для настройки. Вы можете скачать его бесплатно с нашего сайта. Узнайте как настроить подписку на manualshive.com!

Поделиться
Скачать
background image

host1#

show aaa intf-desc-format

exclude sub-interface 
include adapter 

Related Topics

■

show aaa intf-desc-format

Monitoring Included RADIUS Attributes

Purpose

Display the RADIUS attributes that are included in and excluded from Acct-On,
Acct-Off, Access-Request, Acct-Start, and Acct-Stop messages.

Action

To display the list of included RADIUS attributes:

host1# 

show radius attributes-included

                                Account   Account    Access    Account    Account
      Attribute Name              On        Off     Request     Start       Stop
--------------------------      -------   -------   --------   --------   --------
acct-authentic                  enabled   enabled   n/c        n/c        n/c
acct-delay-time                 enabled   enabled   n/c        n/c        n/c
acct-link-count                 n/c       n/c       n/c        enabled    enabled
acct-multi-session-id           n/c       n/c       disabled   enabled    enabled
acct-session-id                 enabled   enabled   enabled    n/c        n/c
acct-terminate-cause            n/c       enabled   n/c        n/c        n/c
acct-tunnel-connection          n/c       n/c       enabled    enabled    enabled
ascend-num-in-multilink         n/c       n/c       disabled   disabled   disabled
called-station-id               n/c       n/c       enabled    enabled    enabled
calling-station-id              n/c       n/c       enabled    enabled    enabled
class                           n/c       n/c       n/c        enabled    enabled
connect-info                    n/c       n/c       enabled    enabled    enabled
delegated-ipv6-prefix           n/c       n/c       n/c        disabled   disabled
dhcp-options                    n/c       n/c       disabled   disabled   disabled
dhcp-mac-address                n/c       n/c       disabled   disabled   disabled
dhcp-gi-address                 n/c       n/c       disabled   disabled   disabled
dsl-forum-attributes            n/c       n/c       disabled   disabled   disabled 
egress-policy-name(vsa)         n/c       n/c       n/c        enabled    enabled
event-timestamp                 enabled   enabled   n/c        enabled    enabled
framed-compression              n/c       n/c       n/c        enabled    enabled
framed-interface-id             n/c       n/c       n/c        disabled   disabled
framed-ip-address               n/c       n/c       n/c        enabled    enabled
framed-ip-netmask               n/c       n/c       n/c        enabled    enabled
framed-ipv6-pool                n/c       n/c       n/c        disabled   disabled
framed-ipv6-prefix              n/c       n/c       n/c        disabled   disabled
framed-ipv6-route               n/c       n/c       n/c        disabled   disabled
ingress-policy-name(vsa)        n/c       n/c       n/c        enabled    enabled
input-gigapkts(vsa)             n/c       n/c       n/c        n/c        enabled
input-gigawords                 n/c       n/c       n/c        n/c        enabled
interface-description           n/c       n/c       enabled    enabled    enabled 
ipv6-acct-input-octets(vsa)     n/c       n/c       n/c        n/c        enabled
ipv6-acct-output-octets(vsa)    n/c       n/c       n/c        n/c        enabled
ipv6-acct-input-packets(vsa)    n/c       n/c       n/c        n/c        enabled
ipv6-acct-output-packets(vsa)   n/c       n/c       n/c        n/c        enabled
ipv6-acct-input-gigawords(vsa)  n/c       n/c       n/c        n/c        enabled
ipv6-acct-output-gigawords(vsa) n/c       n/c       n/c        n/c        enabled

302

■

Monitoring Included RADIUS Attributes

JUNOSe 11.0.x Broadband Access Configuration Guide

Содержание JUNOSE 11.0.X MULTICAST ROUTING





















































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOSE 11.0.X MULTICAST ROUTING

NEC Versa LX Important Information preview
Versa LX
Бренд: NEC Страницы: 4
Panasonic Workio DP-2310 Operating Instructions Manual preview
Workio DP-2310
Бренд: Panasonic Страницы: 20
KIP KUWPD Operation Manual preview
KUWPD
Бренд: KIP Страницы: 22
Blackberry MAIL - BROWSING SMARTPHONE User Manual preview
MAIL - BROWSING SMARTPHONE
Бренд: Blackberry Страницы: 25
Novell SENTINEL 6.1.1.0 - README Manual preview
SENTINEL 6.1.1.0 - README
Бренд: Novell Страницы: 13
ProfiNet ProfinetCommander User Manual preview
ProfinetCommander
Бренд: ProfiNet Страницы: 25
MACROMEDIA DREAMWEAVER 8-EXTENDING DREAMWEAVER Manual preview
DREAMWEAVER 8-EXTENDING DREAMWEAVER
Бренд: MACROMEDIA Страницы: 504
AVG 8.5 ANTI-VIRUS - LINUX-FREEBSD REV 85.2 User Manual preview
8.5 ANTI-VIRUS - LINUX-FREEBSD REV 85.2
Бренд: AVG Страницы: 234
IBM SC34-5764-01 Manual preview
SC34-5764-01
Бренд: IBM Страницы: 481
Casio EMULATOR FX-ES User Manual preview
EMULATOR FX-ES
Бренд: Casio Страницы: 18
F-SECURE MOBILE SECURITY FOR SERIES 80 User Manual preview
MOBILE SECURITY FOR SERIES 80
Бренд: F-SECURE Страницы: 39
JVC Blank Media LYT1015 Instructions Manual preview
Blank Media LYT1015
Бренд: JVC Страницы: 22
JVC ImageMixer 1.7 Instructions Manual preview
ImageMixer 1.7
Бренд: JVC Страницы: 43
JVC JLIP VIDEO CAPTURE Instructions Manual preview
JLIP VIDEO CAPTURE
Бренд: JVC Страницы: 56
JVC GR-DVL500U - Digital Camcorder Instructions Manual preview
GR-DVL500U - Digital Camcorder
Бренд: JVC Страницы: 72
JVC GZMG27US - Everio Camcorder - 680 KP Instructions Manual preview
GZMG27US - Everio Camcorder - 680 KP
Бренд: JVC Страницы: 72
JVC GZ-MG77U - Everio Camcorder - 2.18 MP Instructions Manual preview
GZ-MG77U - Everio Camcorder - 2.18 MP
Бренд: JVC Страницы: 72
JVC Digital Photo Navigator ImageMixer with VCD LYT1116-001A Instructions Manual preview
Digital Photo Navigator ImageMixer with VCD LYT1116-001A
Бренд: JVC Страницы: 50

Бренды по названию

Популярные бренды

Загрузить еще бренды