Juniper JUNOSE 11.0.X MULTICAST ROUTING, Руководство по настройке

Страница: 232 / 788

radius calling-station-format
■
Use to specify the format of the Calling-Station-Id [31] attribute on a virtual
router.
■
For each field in angle brackets (<>) in the Calling-Station-Id formats, the virtual
router supplies the actual value for your configuration, unless otherwise specified.
■
To specify that the RADIUS client use the delimited format when the PPP user
is terminated at the non-LNS E Series router, use the
delimited keyword.
■
Format for ATM interfaces:
<delimiter> <system name> <delimiter> <
interface > <delimiter>
<VPI> <delimiter> <VCI><delimiter>
■
Format for Ethernet interfaces:
<delimiter> <system name> <delimiter> <
interface > <delimiter>
<VLAN>
Where < interface > is one of the following items:
■
<port name>—The default setting
■
<VP description>—Appears if you use the atm vp-description command
to assign a text description to an individual VP on an ATM interface
■
<VC description>—Appears if you use the atm atm1483 description
command to assign a text description to VCs on an ATM 1483 subinterface
and you use the
atm1483 export-subinterface-description command to
enable sending of VC interface descriptors to AAA
■
To specify that the RADIUS client use a fixed format of up to 15 characters
consisting of all ASCII fields, use the
fixed-format keyword. The maximum
number of characters for each field is shown in square brackets ([ ]).
■
Format for ATM interfaces:
<system name [4]> <slot [2]> <port [1]> <VPI [3]> <VCI [5]>
■
Format for Ethernet interfaces:
<system name [4]> <slot [2]> <port [1]> <VLAN [8]>
■
Format for serial interfaces:
<system name [4]> <slot [2]> <port [1]> <0 [8]>
Where the final 8-byte field is always 0 (zero).
■
In the case of PPP terminated at the LNS, the Calling-Station-Id attribute is
based on the received L2TP calling number AVP.
■
To specify that the RADIUS client use a fixed format of up to 15 characters
consisting of all ASCII fields with a 1-byte slot field, 1-byte adapter field, and
1-byte port field, use the
fixed-format-adapter-embedded keyword. The
maximum number of characters for each field is shown in square brackets ([ ]).
■
Format for ATM interfaces:
<system name [4]> <slot [1]> <adapter [1]> <port [1]>
<VPI [3]> <VCI [5]>
■
Format for Ethernet interfaces:
<system name [4]> <slot [1]> <adapter [1]> <port [1]>
192 ■
CLI Commands Used to Modify RADIUS Attributes
JUNOSe 11.0.x Broadband Access Configuration Guide