manualshive.com logo in svg

Juniper JUNOSE 11.0.X MULTICAST ROUTING, Руководство по настройке

Конфигурационный руководство для маршрутизации сети с мультикастом Juniper JUNOSE 11.0.X предоставляет пользовательские руководства для настройки. Вы можете скачать его бесплатно с нашего сайта. Узнайте как настроить подписку на manualshive.com!

Поделиться
Скачать
background image

RADIUS authentication.........................................18
server..................................................18

EAP-Message (RADIUS attribute 79).............................21
Egress-Policy-Name (RADIUS attribute 26-11)............215
enable proxy authenticate command.........................372
encapsulation commands

encapsulation bridge1483...................................621
encapsulation vlan..............................................621

endpoint discriminator...............................................376
equal-access DHCP local server..................................464
Ethernet

configuring dynamic subscriber interfaces..........616

Ethernet interfaces

commands

interface tenGigabitEthernet........................621

Ethernet links

between CPE and PE routers

pool section for Prefix Delegation................107

Event-Timestamp (RADIUS attribute 55)....................202
exclusion ranges

configuring

for delegation of prefixes.............................106

example for non-PPP client requests...................107
for DHCPv6 prefixes

delegated to clients......................................106

Extensible Authentication Protocol. 

See 

 EAP

external parent groups

combined IPv4 and IPv6 services with

example......................................................696

statistics collection for

setting up.....................................................683

F

fixed format

Calling Number AVP...........................................343

fragmentation

and reassembly..................................................333
packet.................................................................331

framed routes dynamic subscriber interfaces.............607
Framed-Compression (RADIUS attribute 13)..............190
Framed-Interface-Id (RADIUS attribute 96).................210
Framed-Ip-Address (RADIUS attribute 8)....................189
Framed-Ip-Netmask (RADIUS attribute 9)...................189
Framed-Ipv6-Pool (RADIUS attribute 100)..................212
Framed-Ipv6-Prefix (RADIUS attribute 97).................211
Framed-IPv6-Prefix attribute

used for DHCPv6 Prefix Delegation

from Access-Accept messages.......................90

Framed-Ipv6-Route (RADIUS attribute 99)..................211
Framed-MTU (RADIUS attribute 12).............................21

G

giaddr................................................................465, 489

GRE (Generic Routing Encapsulation) tunnels dynamic

subscriber interfaces......................................606, 619

guided entrance.................................................636, 687

CoA-Request messages.......................................688

H

HTTP local server...............................................688, 690

guided entrance service......................................690
Service Manager.................................................690

I

I/O adapters. 

See 

 IOAs

ICR partition accounting

viewing the status, enabled or disabled...............310

identification command.....................................356, 359
idle timeout for B-RAS

configuring............................................................88

idle timeout, range for.................................................88
include commands

include circuit-id.................................................581
include dhcp-option 82.......................................581
include hostname...............................................581
include ip-address...............................................581
include mac-address...........................................581
include virtual-router-name.................................581

independent IPv4 and IPv6 services

in a dual stack

activating.....................................................664
backward compatibility...............................664
deactivating.................................................664
performance impact....................................664

service interim accounting..................................670
statistics collection and

external parent groups.................................683

Ingress-Policy-Name (RADIUS attribute 26-10)...........214
inheriting MAC address validation state.....................607
interface commands

interface atm......................................................621
interface fastEthernet..........................................621
interface gigabitEthernet.....................................621
interface ip.........................................................612
interface loopback..............................................621
interface tenGigabitEthernet...............................621

Interface-Desc (RADIUS attribute 26-63)....................223
interfaces

configuring for DHCP local server.......................468
moving...............................................................601

Interim-Acct messages...............................................175

ANCP (L2C)-related VSAs....................................229
DSL Forum VSAs.........................................182, 231

Internet Protocol. 

See 

 IP

IOAs

including in RADIUS Calling-Station-Id

format.............................................................184

736

■

Index

JUNOSe 11.0.x Broadband Access Configuration Guide

Содержание JUNOSE 11.0.X MULTICAST ROUTING





















































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOSE 11.0.X MULTICAST ROUTING

Adobe CAPTIVATE 2 Use Manual preview
CAPTIVATE 2
Бренд: Adobe Страницы: 306
Arturia JUPITER-8V 2 User Manual preview
JUPITER-8V 2
Бренд: Arturia Страницы: 125
Olympus CAMEDIA Master Software Installation Manual preview
CAMEDIA Master
Бренд: Olympus Страницы: 2
AVG 8.5 EMAIL SERVER EDITION - V 85.4 User Manual preview
8.5 EMAIL SERVER EDITION - V 85.4
Бренд: AVG Страницы: 52
Ulead COOL 3D User Manual preview
COOL 3D
Бренд: Ulead Страницы: 100
Polycom CMA V4.0 User Manual preview
CMA V4.0
Бренд: Polycom Страницы: 23
Vitek DMCC Brochure preview
DMCC
Бренд: Vitek Страницы: 1
URC Total Control Mobile Installation & Programming preview
Total Control Mobile
Бренд: URC Страницы: 14
Gallo Studio Devil User Manual preview
Studio Devil
Бренд: Gallo Страницы: 9
VBrick Systems Portal Server ETV v4.1 Admin Manual preview
Portal Server ETV v4.1
Бренд: VBrick Systems Страницы: 140
F-SECURE PSB - ADMINISTRATORS GUIDE FOR CUSTOMERS Manual preview
PSB - ADMINISTRATORS GUIDE FOR CUSTOMERS
Бренд: F-SECURE Страницы: 40
E-Mu 404 Tutorials Manual preview
404
Бренд: E-Mu Страницы: 42
FieldServer FS-8700-73 Driver Manual preview
FS-8700-73
Бренд: FieldServer Страницы: 48
Autodesk 18507-051452-9325 - UPG ARCH DESKTOP 2007 Installation Manual preview
18507-051452-9325 - UPG ARCH DESKTOP 2007
Бренд: Autodesk Страницы: 104
Cabletron Systems CBU-NM User Manual preview
CBU-NM
Бренд: Cabletron Systems Страницы: 108
KAPERSKY ANTI-VIRUS 5.0 - FOR LOTUS NOTES-DOMINO User Manual preview
ANTI-VIRUS 5.0 - FOR LOTUS NOTES-DOMINO
Бренд: KAPERSKY Страницы: 137
KAPERSKY SECURITY - FOR PDA 4.5 User Manual preview
SECURITY - FOR PDA 4.5
Бренд: KAPERSKY Страницы: 137
Tandem ENFORM 058057 Reference Manual preview
ENFORM 058057
Бренд: Tandem Страницы: 312

Бренды по названию

Популярные бренды

Загрузить еще бренды