manualshive.com logo in svg

Juniper JUNOSE 11.0.X MULTICAST ROUTING, Руководство по настройке

Конфигурационный руководство для маршрутизации сети с мультикастом Juniper JUNOSE 11.0.X предоставляет пользовательские руководства для настройки. Вы можете скачать его бесплатно с нашего сайта. Узнайте как настроить подписку на manualshive.com!

Поделиться
Скачать
background image

Using the Broadcast Flag Setting to Control Transmission of DHCP Reply

Packets ...........................................................................................492
Interaction with Layer 2 Unicast Transmission Method ..................493

Preventing DHCP Relay from Installing Host Routes by Default ............494

Configuration Example—Preventing Installation of Host Routes .....494

Including Relay Agent Option Values in the PPPoE Remote Circuit

ID ...................................................................................................495

Using the Giaddr to Identify the Primary Interface for Dynamic Subscriber

Interfaces .......................................................................................496

Configuring Layer 2 Unicast Transmission Method for Reply Packets to

DHCP Clients ..................................................................................496

Using Option 60 Strings to Forward Client Traffic to Specific DHCP

Servers ...........................................................................................497
Configuration Example—Using DHCP Relay Option 60 to Specify

Traffic Forwarding ...................................................................499

Relaying DHCP Packets That Originate from a Cable Modem ...............500
Configuring Relay Agent Option 82 Information ...................................500
Preventing Option 82 Information from Being Stripped from Trusted

Client Packets .................................................................................501

Configuring Relay Agent Information Option (Option 82) Suboption

Values ............................................................................................501
Format of the JUNOSe Data Field in the Vendor-Specific Suboption

for Option 82 ...........................................................................503

Using the set dhcp relay agent sub-option Command to Enable

Option 82 Suboption Support ..................................................505

Configuration Example—Using DHCP Relay Option 82 to Pass IEEE

802.1p Values to DHCP Servers ...............................................507

Using the set dhcp relay agent Command to Enable Option 82

Suboption Support ...................................................................510

Configuring DHCP Relay Proxy ...................................................................512

Enabling DHCP Relay Proxy .................................................................513
Use the First Offer from a DHCP Server ................................................513
Set a Timeout for DHCP Client Renewal Messages ................................513
Managing Host Routes ..........................................................................513

Selecting the DHCP Server Response ..............................................514
Behavior for Bound Clients and Address Renewals .........................514

Chapter 21

Configuring the DHCP External Server Application

517

DHCP External Server Overview .................................................................517
Preservation of Dynamic Subscriber Interfaces with DHCP External Server

Overview ..............................................................................................519

DHCP External Server Identification of Clients with Duplicate MAC Addresses

Overview ..............................................................................................520
Configuration Guidelines for Using Duplicate MAC Mode ......................521
Restrictions for Using Duplicate MAC Mode to Manage Clients .............521

DHCP External Server Configuration Requirements ....................................522
Enabling and Disabling the DHCP External Server Application ....................522
Monitoring DHCP Traffic Between Remote Clients and DHCP Servers ........523
Synchronizing the DHCP External Application and the Router ....................523

xxii

■

Table of Contents

JUNOSe 11.0.x Broadband Access Configuration Guide

Содержание JUNOSE 11.0.X MULTICAST ROUTING





















































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOSE 11.0.X MULTICAST ROUTING

Garmin ecoRoute Owner'S Manual Supplement preview
ecoRoute
Бренд: Garmin Страницы: 8
Samsung ML-1610 - B/W Laser Printer Manual preview
ML-1610 - B/W Laser Printer
Бренд: Samsung Страницы: 18
Samsung ML 3471ND - B/W Laser Printer Manual preview
ML 3471ND - B/W Laser Printer
Бренд: Samsung Страницы: 27
Samsung MFP SCX-6345N User Manual preview
MFP SCX-6345N
Бренд: Samsung Страницы: 49
Xerox FreeFlow Manual preview
FreeFlow
Бренд: Xerox Страницы: 18
Intergraph InterSite Quick Start Manual preview
InterSite
Бренд: Intergraph Страницы: 46
Fargo Persona Persona M30e User Manual preview
Persona Persona M30e
Бренд: Fargo Страницы: 31
Epson PowerLite 955W Specification Sheet preview
PowerLite 955W
Бренд: Epson Страницы: 6
Epson Stylus Color 600Q Specification Sheet preview
Stylus Color 600Q
Бренд: Epson Страницы: 1
Epson Stylus Pro - Stylus Color Pro Ink Jet Printer Specification Sheet preview
Stylus Pro - Stylus Color Pro Ink Jet Printer
Бренд: Epson Страницы: 14
Epson Software Film Factory User Manual preview
Software Film Factory
Бренд: Epson Страницы: 73
Epson Stylus Pro - Stylus Color Pro Ink Jet Printer Reference Manual preview
Stylus Pro - Stylus Color Pro Ink Jet Printer
Бренд: Epson Страницы: 98
Epson Stylus Color 600Q User Manual preview
Stylus Color 600Q
Бренд: Epson Страницы: 95
Epson PowerLite 955W User Manual preview
PowerLite 955W
Бренд: Epson Страницы: 209
Epson PowerLite D6150 User Manual preview
PowerLite D6150
Бренд: Epson Страницы: 196
ASCOM DURAALARM - 1 Brochure preview
DURAALARM - 1
Бренд: ASCOM Страницы: 28
TRENDnet VIP-L16 - Installation Manual preview
VIP-L16 -
Бренд: TRENDnet Страницы: 21
Autodesk 18506-091462-9305 - Architectural Desktop 2006 Update Manual preview
18506-091462-9305 - Architectural Desktop 2006
Бренд: Autodesk Страницы: 290

Бренды по названию

Популярные бренды

Загрузить еще бренды