Juniper JUNOSE 11.0.X MULTICAST ROUTING, Руководство по настройке

Страница: 149 / 788

Chapter 2
Monitoring and Troubleshooting Remote
Access
Use the commands in this chapter to set baselines for and to monitor remote access.
■
Setting Baselines for Remote Access on page 110
■
How to Monitor PPP Interfaces on page 112
■
Monitoring AAA Accounting Configuration on page 112
■
Monitoring AAA Accounting Default on page 113
■
Monitoring Accounting Interval on page 114
■
Monitoring Specific Virtual Router Groups on page 114
■
Monitoring the Default AAA Authentication Method List on page 115
■
Monitoring Domain and Realm Name Delimiters on page 115
■
Monitoring Mapping Between User Domains and Virtual Routers on page 115
■
Monitoring Tunnel Subscriber Authentication on page 117
■
Monitoring Routing Table Address Lookup on page 118
■
Monitoring the AAA Model on page 118
■
Monitoring IP Addresses of Primary and Secondary DNS and WINS Name
Servers on page 118
■
Monitoring AAA Profile Configuration on page 119
■
Monitoring Statistics about the RADIUS Route-Download Server on page 120
■
Monitoring Routes Downloaded by the RADIUS Route-Download
Server on page 122
■
Monitoring Chassis-Wide Routes Downloaded by RADIUS Route-Download
Servers on page 123
■
Monitoring Authentication, Authorization, and Accounting Statistics on page 125
■
Monitoring the Number of Active Subscribers Per Port on page 127
■
Monitoring the Maximum Number of Active Subscribers Per Virtual
Router on page 127
■
Monitoring Session Timeouts on page 127
■
Monitoring Interim Accounting for Users on the Virtual Router on page 128
■
Monitoring Virtual Router Groups Configured for AAA Broadcast
Accounting on page 128
■ 109