manualshive.com logo in svg

Juniper JUNOSE 11.0.X MULTICAST ROUTING, Руководство по настройке

Конфигурационный руководство для маршрутизации сети с мультикастом Juniper JUNOSE 11.0.X предоставляет пользовательские руководства для настройки. Вы можете скачать его бесплатно с нашего сайта. Узнайте как настроить подписку на manualshive.com!

Поделиться
Скачать
background image

multiple configuration

on virtual router, preference order...............103

name length..........................................................60
not configured in domain map

method for determining prefix to be

delegated.................................................103

order of preference

in selection for delegation of prefixes..........103

Prefix Delegation

example scenario........................................103

prerequisite for configuring.................................105
procedure

for configuring on a virtual router................104

removing from

domain map..................................................60

specifying

domain name for DNS resolution................104
exclusion range for prefixes.........................104
IPv6 address of DNS server.........................104
preferred lifetime.........................................104
prefix range.................................................104
starting and ending prefixes of a range........104
valid lifetime................................................104

used for Prefix Delegation from

AAA domain map........................................103
interface address.........................................103
RADIUS server.............................................103

IPv6 Neighbor Discovery

and DHCPv6 Prefix Delegation

without configuring Delegated-IPv6-Prefix

..................................................................9 0

IPv6-NdRa-Prefix

in Access-Accept messages............................90

standard RADIUS attributes

configuring ...................................................90
verifying......................................................148

IPv6 prefix ranges

configuring

with the starting and ending prefixes..........105
with the starting prefix and length...............105

IPv6 services

in a dual stack

activating.....................................................664
combined and independent

configuration............................................663

deactivating.................................................664
with IPv4 services........................................663

IPv6-Acct-Input-Gigawords [26-155] ..........................228
IPv6-Acct-Input-Octets [26-151] ................................228
IPv6-Acct-Input-Packets [26-153]...............................228
IPv6-Acct-Output-Gigawords [26-156]........................228
IPv6-Acct-Output-Octets [26-152]...............................228
IPv6-Acct-Output-Packets [26-154] ............................228
Ipv6-Local-Interface (RADIUS attribute 26-46)............219
Ipv6-NdRa-Prefix (RADIUS attribute 26-46)................225

IPv6-NdRa-Prefix attribute

used for IPv6 Neighbor Discovery

from Access-Accept messages.......................90

IPv6-Primary-DNS (RADIUS attribute 26-47)..............220
Ipv6-Secondary-DNS (RADIUS attribute 26-46)...........220
IPv6-Virtual-Router (RADIUS attribute 26-45).............219

K

key command........................................30, 80, 242, 250

L

L2C-Down-Stream-Data (RADIUS attribute

26-93).....................................................................225

L2C-Information (RADIUS attribute 26-81).................224
L2C-Up-Stream-Data (RADIUS attribute 26-92)...........224
L2TP (Layer 2 Tunneling Protocol)

defining..............................................................329
high availability considerations...........................336
implementation..................................................331
license................................................................336
modifying LAC default settings...................338, 379
monitoring..........................................................421
peer resynchronization.......................................385
rx speed .............................................................359
sessions supported..............................................335
silent failover......................................................385
tunnel selection...................................................364
tunnel switch profiles..........................................388

L2TP access concentrator. 

See 

 LAC

l2tp commands..........................................................380

disconnect-cause.................................................380
failover-resync ...................................................388
l2tp checksum....................................................339
l2tp destination lockout-test................................363
l2tp destination lockout-timeout.........................363
l2tp destination profile................................370, 373
l2tp destruct-timeout...........................................339
l2tp disable calling-number avp..........................343
l2tp disable challenge.........................................353
l2tp disconnect-cause..........................................380
l2tp drain............................................................340
l2tp drain destination..........................................340
l2tp drain tunnel.................................................340
l2tp fail-over-within-preference...........................364
l2tp failover-resync ....................................385, 388
l2tp ignore-receive-data-sequencing....................353
l2tp ignore-transmit-address-change...................363
l2tp reject-transmit-address-change....................363
l2tp retransmission.............................................343
l2tp short-drain-timeout......................................340
l2tp shutdown.....................................................342
l2tp shutdown destination..................................342
l2tp shutdown session........................................342
l2tp shutdown tunnel..........................................342

738

■

Index

JUNOSe 11.0.x Broadband Access Configuration Guide

Содержание JUNOSE 11.0.X MULTICAST ROUTING





















































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOSE 11.0.X MULTICAST ROUTING

Xtore XN200 series XN-004-A1 User Manual preview
XN200 series XN-004-A1
Бренд: Xtore Страницы: 4
Xtore XN200 series XN-004-A1 Software Manual preview
XN200 series XN-004-A1
Бренд: Xtore Страницы: 7
Samsung HXDU010EB - Story Station 1 TB External Hard... User Manual preview
HXDU010EB - Story Station 1 TB External Hard...
Бренд: Samsung Страницы: 7
MACROMEDIA COLDFUSION 5-ADVANCED ADMINISTRATION Manual preview
COLDFUSION 5-ADVANCED ADMINISTRATION
Бренд: MACROMEDIA Страницы: 372
Blackberry TICKETMASTER - LEARN MORE User Manual preview
TICKETMASTER - LEARN MORE
Бренд: Blackberry Страницы: 7
Avaya IP Office CTI Link Programmer'S Manual preview
IP Office CTI Link
Бренд: Avaya Страницы: 28
MACROMEDIA COLDFUSION MX 61-GETTING STARTED BUILDING COLDFUSION... Getting Started preview
COLDFUSION MX 61-GETTING STARTED BUILDING COLDFUSION...
Бренд: MACROMEDIA Страницы: 134
ESET SMART SECURITY User Manual preview
SMART SECURITY
Бренд: ESET Страницы: 38
Red Hat APPLICATION STACK 1.3 RELEASE Release Note preview
APPLICATION STACK 1.3 RELEASE
Бренд: Red Hat Страницы: 26
Polycom Conference Composer User Manual preview
Conference Composer
Бренд: Polycom Страницы: 29
Cabletron Systems SEHI-22/24 User Manual preview
SEHI-22/24
Бренд: Cabletron Systems Страницы: 90
KAPERSKY ADMINISTRATION KIT 6.0 Reference preview
ADMINISTRATION KIT 6.0
Бренд: KAPERSKY Страницы: 229
IBM PERFORMANCE MANAGEMENT FOR POWER SYSTEMS - INTERACTIVE GRAPHING SUPPORT FOR ... Manual preview
PERFORMANCE MANAGEMENT FOR POWER SYSTEMS - INTERACTIVE GRAPHING SUPPORT FOR ...
Бренд: IBM Страницы: 29
LXE 1280 Reference Manual preview
1280
Бренд: LXE Страницы: 260
Canon Digital Video Software (Macintosh) Ver.11 Instruction Manual preview
Digital Video Software (Macintosh) Ver.11
Бренд: Canon Страницы: 56
Canon iR2270 Series User Manual preview
iR2270 Series
Бренд: Canon Страницы: 84
Canon DV Messenger Instruction Manual preview
DV Messenger
Бренд: Canon Страницы: 92
Canon DV-PC Software Instruction Manual preview
DV-PC
Бренд: Canon Страницы: 31

Бренды по названию

Популярные бренды

Загрузить еще бренды