manualshive.com logo in svg

Juniper JUNOSE 11.0.X MULTICAST ROUTING, Руководство по настройке

Конфигурационный руководство для маршрутизации сети с мультикастом Juniper JUNOSE 11.0.X предоставляет пользовательские руководства для настройки. Вы можете скачать его бесплатно с нашего сайта. Узнайте как настроить подписку на manualshive.com!

Поделиться
Скачать
background image

 ipv6 policy secondary-input pl6-v4v6-<# genericName #>-in statistics enabled merge

<# env.setResult("activate-profile", profileName) #>
<# env.setResult("service-interface-type", "ipv4-ipv6") #>
<# env.setResult("secondary-input-stat-epg", "vb-v4v6-"$ uid $"-in v4v6-"$ uid $"") #>
<# env.setResult("output-stat-epg", "vb-v4v6-"$ uid $"-out v4v6-"$ uid $"") #>
<# endtmpl #>

In the service definition macro, a hierarchical policy parameter for the rate limit is
created with an aggregation node value. The aggregation node stores a single rate-limit
instance and statistics for this rate-limit. An external rate-limit aggregation node can
be defined by the 4-tuple (slot, direction, external parent group name, parameter
value). Each reference to a policy parameter in a policy is substituted with its value
for all attachments of this policy at the interface.

Two rate-limit profiles are created, one each for the ingress and egress interfaces.
Rate limiters are implemented using a dual token bucket scheme: a token bucket for
conformed (yellow) packets and a token bucket for committed (green) packets. The
following are the attributes configured in the rate-limit profile applied to ingress and
egress interfaces:

■

The committed rate for the rate-limit profile is entered as a specified value.

■

The committed action, which specifies the action for packets conforming to the
committed rate and committed burst size and conforming to the exceed rate
and exceed burst size for a rate-limit profile is set to receive transmit
unconditional.

■

The conformed action, which sets the action for packets not conforming to the
committed rate and committed burst size, but conforming to the peak rate and
peak burst size for a rate-limit profile is set to receive transmit unconditional.

Two external parent groups, one each for the ingress and egress interfaces, that
reference the rate-limit profiles created for incoming and outgoing traffic, are created
and specified in the service definition.

Classifier control lists for ingress IPv4 and IPv6 traffic, and for egress IPv4 and IPv6
traffic, are also created. These classifiers classify traffic based on source and
destination addresses.

The input and output classifier lists for IPv4 traffic are used in IP policy lists that are
attached to the ingress and egress IPv4 interfaces respectively. The input and output
classifier lists for IPv6 traffic are used in IPv6 policy lists that are attached to the
ingress and egress IPv6 interfaces respectively. The 

external parent-group

 keyword

creates an external parent group in a rate-limit hierarchy for IPv4 and IPv6. All packets
matching the classifier are sent to the parent group for further processing.

The policy lists for voice-over-IP traffic are configured in the service definition macro
file that creates a combined IPv4/IPv6 service to be applied to the ingress IPv4 and
IPv6 interfaces.

A profile is created that you want to attach to the service session. The IPv4 and IPv6
policies for voice-over-IP traffic arriving at the IPv4 and IPv6 interfaces respectively

698

■

Service Definition Examples

JUNOSe 11.0.x Broadband Access Configuration Guide

Содержание JUNOSE 11.0.X MULTICAST ROUTING





















































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOSE 11.0.X MULTICAST ROUTING

Cabletron Systems SmartSwitch 1800 User Manual preview
SmartSwitch 1800
Бренд: Cabletron Systems Страницы: 48
Yamaha MOTIF XF Owner'S Manual preview
MOTIF XF
Бренд: Yamaha Страницы: 11
IBM E02HRLL-G - WebSphere Partner Gateway... Administration Manual preview
E02HRLL-G - WebSphere Partner Gateway...
Бренд: IBM Страницы: 268
CA BABWBN2900E20 - BRIGHTSTOR ARC BACKUP V9... Manual preview
BABWBN2900E20 - BRIGHTSTOR ARC BACKUP V9...
Бренд: CA Страницы: 69
Lexicon MPX NATIVE REVERB PLUG-IN Owner'S Manual preview
MPX NATIVE REVERB PLUG-IN
Бренд: Lexicon Страницы: 24
Fargo Persona Persona M30e User Manual preview
Persona Persona M30e
Бренд: Fargo Страницы: 31
Bosch VIDOS Installation And Operating Manual preview
VIDOS
Бренд: Bosch Страницы: 40
Bosch Divar Archive Player Operation Manual preview
Divar Archive Player
Бренд: Bosch Страницы: 10
Bosch MBV-BPRO-40 Operator'S Manual preview
MBV-BPRO-40
Бренд: Bosch Страницы: 86
Bosch DINION IP 5000 MP Software Manual preview
DINION IP 5000 MP
Бренд: Bosch Страницы: 112
Multitech FaxFinder V.34 User Manual preview
FaxFinder V.34
Бренд: Multitech Страницы: 96
Zing Magic Checkers User Manual preview
Checkers
Бренд: Zing Magic Страницы: 10
Symantec ASSET MANAGEMENT SUITE 7.0 Datasheet preview
ASSET MANAGEMENT SUITE 7.0
Бренд: Symantec Страницы: 4
Symantec ANTIVIRUS 5.2 - FOR NETWORK ATTACHED STORAGE Datasheet preview
ANTIVIRUS 5.2 - FOR NETWORK ATTACHED STORAGE
Бренд: Symantec Страницы: 3
Symantec Altiris CMDB Solution 7.0 Manual preview
Altiris CMDB Solution 7.0
Бренд: Symantec Страницы: 64
Nikon 9235 - Coolscan III Reference Manual preview
9235 - Coolscan III
Бренд: Nikon Страницы: 153
Altigen AltiSupervisor Manual preview
AltiSupervisor
Бренд: Altigen Страницы: 34
IBM TIVOLI SC32-0129-00 User Manual preview
TIVOLI SC32-0129-00
Бренд: IBM Страницы: 82

Бренды по названию

Популярные бренды

Загрузить еще бренды