manualshive.com logo in svg

Juniper JUNOSE 11.0.X MULTICAST ROUTING, Руководство по настройке

Конфигурационный руководство для маршрутизации сети с мультикастом Juniper JUNOSE 11.0.X предоставляет пользовательские руководства для настройки. Вы можете скачать его бесплатно с нашего сайта. Узнайте как настроить подписку на manualshive.com!

Поделиться
Скачать
background image

ipv6-local-interface(vsa)       n/c       n/c       n/c        disabled   disabled
ipv6-nd-ra-prefix(vsa)          n/c       n/c       n/c        disabled   disabled
ipv6-primary-dns(vsa)           n/c       n/c       n/c        disabled   disabled
ipv6-secondary-dns(vsa)         n/c       n/c       n/c        disabled   disabled
ipv6-virtual-router(vsa)        n/c       n/c       n/c        disabled   disabled
l2c-downstream-data(vsa)        n/c       n/c       disabled   disabled   disabled
l2c-upstream-data(vsa)          n/c       n/c       disabled   disabled   disabled
l2cd-acc-loop-cir-id(vsa)       n/c       n/c       disabled   disabled   disabled 
l2cd-acc-aggr-cir-id-bin(vsa)   n/c       n/c       disabled   disabled   disabled 
l2cd-acc-aggr-cir-id-asc(vsa)   n/c       n/c       disabled   disabled   disabled 
l2cd-act-data-rate-up(vsa)      n/c       n/c       disabled   disabled   disabled 
l2cd-act-data-rate-dn(vsa)      n/c       n/c       disabled   disabled   disabled 
l2cd-min-data-rate-up(vsa)      n/c       n/c       disabled   disabled   disabled 
l2cd-min-data-rate-dn(vsa)      n/c       n/c       disabled   disabled   disabled 
l2cd-att-data-rate-up(vsa)      n/c       n/c       disabled   disabled   disabled 
l2cd-att-data-rate-dn(vsa)      n/c       n/c       disabled   disabled   disabled 
l2cd-max-data-rate-up(vsa)      n/c       n/c       disabled   disabled   disabled 
l2cd-max-data-rate-dn(vsa)      n/c       n/c       disabled   disabled   disabled 
l2cd-min-lp-data-rate-up(vsa)   n/c       n/c       disabled   disabled   disabled 
l2cd-min-lp-data-rate-dn(vsa)   n/c       n/c       disabled   disabled   disabled 
l2cd-max-interlv-delay-up(vsa)  n/c       n/c       disabled   disabled   disabled 
l2cd-act-interlv-delay-up(vsa)  n/c       n/c       disabled   disabled   disabled 
l2cd-max-interlv-delay-dn(vsa)  n/c       n/c       disabled   disabled   disabled 
l2cd-act-interlv-delay-dn(vsa)  n/c       n/c       disabled   disabled   disabled 
l2cd-dsl-line-state(vsa)        n/c       n/c       disabled   disabled   disabled 
l2cd-dsl-type(vsa)              n/c       n/c       disabled   disabled   disabled 
l2tp-ppp-disconnect-cause       n/c       n/c       n/c        n/c        disabled
mlppp-bundle-name               n/c       n/c       enabled    enabled    enabled
nas-identifier                  enabled   enabled   enabled    enabled    enabled
nas-port                        n/c       n/c       enabled    enabled    enabled
nas-port-id                     n/c       n/c       enabled    enabled    enabled
nas-port-type                   n/c       n/c       enabled    enabled    enabled
output-gigapkts(vsa)            n/c       n/c       n/c        n/c        enabled
output-gigawords                n/c       n/c       n/c        n/c        enabled
pppoe-description(vsa)          n/c       n/c       enabled    enabled    enabled
profile-service-descr(vsa)      n/c       n/c       disabled   disabled   disabled
tunnel-assignment-id            n/c       n/c       n/c        enabled    enabled
tunnel-client-auth-id           n/c       n/c       enabled    enabled    enabled
tunnel-client-endpoint          n/c       n/c       enabled    enabled    enabled
tunnel-interface-id             n/c       n/c       disabled   disabled   disabled
tunnel-medium-type              n/c       n/c       enabled    enabled    enabled
tunnel-preference               n/c       n/c       n/c        enabled    enabled
tunnel-server-attributes        n/c       n/c       disabled   disabled   disabled
tunnel-server-auth-id           n/c       n/c       enabled    enabled    enabled
tunnel-server-endpoint          n/c       n/c       enabled    enabled    enabled
tunnel-type                     n/c       n/c       enabled    enabled    enabled

Meaning

Table 58 on page 303 lists the 

show radius attributes-included 

command output

fields.

Table 58: show radius attributes-included Output Fields

Field Description

Field Name

Name of the RADIUS attribute

Attribute Name

Include status of the attribute in Acct-On messages:
enabled, disabled, not configurable (n/c)

Account On

Monitoring Included RADIUS Attributes

■

303

Chapter 8: Monitoring RADIUS

Содержание JUNOSE 11.0.X MULTICAST ROUTING





















































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOSE 11.0.X MULTICAST ROUTING

AVIRA ANTIVIR VIRUS SCAN ADAPTER Configuration preview
ANTIVIR VIRUS SCAN ADAPTER
Бренд: AVIRA Страницы: 29
Nortel Quality Monitoring Reference Manual preview
Quality Monitoring
Бренд: Nortel Страницы: 22
Adobe 65014293 - Photoshop CS4 - Mac Manual preview
65014293 - Photoshop CS4 - Mac
Бренд: Adobe Страницы: 87
Cabletron Systems Lancast Media Converter 7000 User Manual preview
Lancast Media Converter 7000
Бренд: Cabletron Systems Страницы: 108
Novell OPEN WORKGROUP SUITE SMALL BUSINESS EDITION 9.3 - ADMINISTRATION 10-2007 Manual preview
OPEN WORKGROUP SUITE SMALL BUSINESS EDITION 9.3 - ADMINISTRATION 10-2007
Бренд: Novell Страницы: 30
Red Hat CLUSTER SUITE 4.7 - CLUSTER LVM ADMINISTRATORS Manual preview
CLUSTER SUITE 4.7 - CLUSTER LVM ADMINISTRATORS
Бренд: Red Hat Страницы: 108
TomTom Navigation app for iPhone/iPad Reference Manual preview
Navigation app for iPhone/iPad
Бренд: TomTom Страницы: 84
Nikon Capture 3 Install Manual preview
Capture 3
Бренд: Nikon Страницы: 119
3Com 3C15500 - Network Director - PC User Manual preview
3C15500 - Network Director - PC
Бренд: 3Com Страницы: 924
Oracle Enterprise Manager Installation And Configuration Manual preview
Enterprise Manager
Бренд: Oracle Страницы: 38
MACROMEDIA BREEZE-USING THE BREEZE XML WEB SERVICES Use Manual preview
BREEZE-USING THE BREEZE XML WEB SERVICES
Бренд: MACROMEDIA Страницы: 196
Ulead MEDIASTUDIO PRO 8.0 - SMART COMPOSITOR... User Manual preview
MEDIASTUDIO PRO 8.0 - SMART COMPOSITOR...
Бренд: Ulead Страницы: 308
Yamaha MOTIF6 Voice Editor Manual preview
MOTIF6 Voice Editor
Бренд: Yamaha Страницы: 33
Native Instruments Skanner User Manual preview
Skanner
Бренд: Native Instruments Страницы: 55
FARONICS POWER SAVE - REQUIREMENTS GUIDE Manual preview
POWER SAVE - REQUIREMENTS GUIDE
Бренд: FARONICS Страницы: 17
Wavelink Communicator wlcug1020090331 User Manual preview
Communicator wlcug1020090331
Бренд: Wavelink Страницы: 67
Hitachi MK-96RD617-08 User Manual preview
MK-96RD617-08
Бренд: Hitachi Страницы: 248
Dell PowerVault ML6000 Maintenance Manual preview
PowerVault ML6000
Бренд: Dell Страницы: 494

Бренды по названию

Популярные бренды

Загрузить еще бренды