manualshive.com logo in svg

Juniper JUNOSE 11.0.X MULTICAST ROUTING, Руководство по настройке

Конфигурационный руководство для маршрутизации сети с мультикастом Juniper JUNOSE 11.0.X предоставляет пользовательские руководства для настройки. Вы можете скачать его бесплатно с нашего сайта. Узнайте как настроить подписку на manualshive.com!

Поделиться
Скачать
background image

RADIUS attributes in preauthentication

request........................................................76, 77

troubleshooting.....................................................76
using to track subscribers.....................................76

AAA logical line identifier (LLID). 

See 

 AAA LLID

AAA profile commands

aaa profile.............................................................68
allow.....................................................................63
deny.....................................................................63
nas-port-type atm.................................................68
nas-port-type ethernet..........................................68
ppp aaa-profile................................................68, 76
service-description................................................68
translate................................................................68

AAA profiles.................................................................63

allowing or denying domain names......................63
configuring............................................................63
creating domain name aliases...............................63
manually setting NAS-Port-Type............................68
setting Service-Description....................................68

AAA tunnel groups

L2TP transmit connect speed..............................399

Access-Accept messages............................................167

pool or prefix name

not available in..............................................60

preference order

in allocation of IPv6 prefixes.......................104

RADIUS attribute used in

Prefix Delegation...........................................60

with Framed-IPv6-Prefix attribute

for Prefix Delegation......................................90

with IPv6-NdRa-Prefix attribute

for IPv6 Neighbor Discovery..........................90

Access-Challenge messages................................167, 184
Access-Reject messages.....................................167, 184
Access-Request messages..........................................167

ANCP (L2C)-related VSAs....................................229
DSL Forum VSAs.........................................182, 231

accounting

broadcast..............................................................18
configuring servers...............................................18
configuring ........................................311
description..............................................................5
duplicate...............................................................18
server access.........................................................18
server request processing limit.............................18
SNMP traps...........................................................33
specifying methods...............................................18
...........................................................311

accounting statistics

tunneled PPP session..........................................402

Acct-Authentic (RADIUS attribute 45).........................200
Acct-Delay-Time (RADIUS attribute 41)......................198
Acct-Input-Gigapackets (RADIUS attribute 26-35).......218
Acct-Input-Gigawords (RADIUS attribute 52)..............202
Acct-Link-Count (RADIUS attribute 51).......................201

Acct-Multi-Session-Id (RADIUS attribute 50)...............201
Acct-Off messages......................................................175
Acct-On messages......................................................175
Acct-Output-Gigapackets (RADIUS attribute

26-36).....................................................................218

Acct-Session-Id (RADIUS attribute 44)........199, 657, 666
Acct-Start messages...................................................175

ANCP (L2C)-related VSAs....................................229
DSL Forum VSAs.........................................182, 231

Acct-Stop messages....................................................175

ANCP (L2C)-related VSAs....................................229
DSL Forum VSAs.........................................182, 231

Acct-Terminate-Cause (RADIUS attribute 49)..............200
Acct-Tunnel-Connection (RADIUS attribute 68)..........206
Activate-Service (RADIUS attribute 26-65)..................657
address command, L2TP....................................353, 357
address pool

mapping to domain name....................................57
ranges...................................................................54

address-pool-name command......................................57
agent circuit ID (suboption 1).....................................501
agent remote ID (suboption 2)...................................501
agent-circuit-id

including in Calling Number AVP........................343
including in PPPoE remote circuit ID format.......495

agent-remote-id

including in Calling Number AVP........................343
including in PPPoE remote circuit ID format.......495

allow command...........................................................63
Ascend-Num-In-Multilink (RADIUS attribute 188).......213
ATM (Asynchronous Transfer Mode)

E120 and E320 routers.......................................603

atm atm1483 advisory-rx-speed command

and L2TP............................................................359

atm commands

atm.......................................................................82
atm pvc .............................................................621

ATM subinterface

configuring multiple clients...................................62
configuring single clients.......................................61

attribute value pair. 

See 

 AVP

authentication

AAA overview.....................................................311
configuring servers...............................................18
configuring ........................................311
description..............................................................5
EAP.......................................................................18
preauthenticating users...........................................9
redirected authentication........................................9
server access.........................................................18
server request processing limit.............................18
SNMP traps...........................................................33
specifying methods...............................................18

authentication and accounting servers

configuring............................................................18

authentication login, .................................311

730

■

Index

JUNOSe 11.0.x Broadband Access Configuration Guide

Содержание JUNOSE 11.0.X MULTICAST ROUTING





















































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOSE 11.0.X MULTICAST ROUTING

Canon EOS-1D Mark II Digial Software Manual preview
EOS-1D Mark II Digial
Бренд: Canon Страницы: 2
Internet Security Systems RealSecure User Manual preview
RealSecure
Бренд: Internet Security Systems Страницы: 126
Vitek DMCC Brochure preview
DMCC
Бренд: Vitek Страницы: 1
Supermicro Web-based Management Utility User Manual preview
Web-based Management Utility
Бренд: Supermicro Страницы: 64
YASKAWA XTRAWARE - V3.0 Manual preview
XTRAWARE - V3.0
Бренд: YASKAWA Страницы: 263
Gallo Studio Devil User Manual preview
Studio Devil
Бренд: Gallo Страницы: 9
FieldServer FS-8704-14 EtherNet Driver Manual preview
FS-8704-14 EtherNet
Бренд: FieldServer Страницы: 30
Qlogic Data Migration Service User Manual preview
Data Migration Service
Бренд: Qlogic Страницы: 162
Lucid Virtu Installation Manual preview
Virtu
Бренд: Lucid Страницы: 10
Lucid FM2A85X Extreme4 Installation Manual preview
FM2A85X Extreme4
Бренд: Lucid Страницы: 12
Xerox FREEFLOW 701P25032 System Manual preview
FREEFLOW 701P25032
Бренд: Xerox Страницы: 112
DeLorme Topo USA 8.0 User Manual preview
Topo USA 8.0
Бренд: DeLorme Страницы: 280
Canon SD400 - PowerShot Digital ELPH Camera Software User'S Manual preview
SD400 - PowerShot Digital ELPH Camera
Бренд: Canon Страницы: 133
UNIBLUE SYSTEMTWEAKER 2010 - V1 Product Manual preview
SYSTEMTWEAKER 2010 - V1
Бренд: UNIBLUE Страницы: 13
Oki Okicolor8 Instruction Manual preview
Okicolor8
Бренд: Oki Страницы: 39
Xerox 3812 User Manual preview
3812
Бренд: Xerox Страницы: 28
Atmel AT85RFD-07 User Manual preview
AT85RFD-07
Бренд: Atmel Страницы: 10
Pioneer CNDV-60MP - Navigation System Upgrade Operation Manual preview
CNDV-60MP - Navigation System Upgrade
Бренд: Pioneer Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды