Juniper JUNOSE 11.0.X MULTICAST ROUTING, Руководство по настройке

Страница: 675 / 788

Chapter 27
Configuring Service Manager
This chapter describes how to use the Service Manager application to define, activate,
and monitor networking services for your subscribers. This chapter discusses the
following topics:
■
Service Manager Overview on page 635
■
Service Manager Platform Considerations on page 637
■
Service Manager References on page 637
■
Service Manager Configuration Tasks on page 637
■
Service Definitions on page 639
■
Referencing Policies in Service Definitions on page 644
■
Referencing QoS Configurations in Service Definitions on page 645
■
Configuring the Service Manager License on page 653
■
Managing and Activating Service Sessions on page 654
■
Using RADIUS to Manage Subscriber Service Sessions on page 654
■
Using Mutex Groups to Activate and Deactivate Subscriber Services on page 661
■
Combined and Independent IPv4 and IPv6 Services in a Dual Stack
Overview on page 663
■
Activation and Deactivation of IPv4 and IPv6 Services in a Dual Stack on page 664
■
Configuring RADIUS Accounting for Service Manager on page 666
■
Using the CLI to Manage Subscriber Service Sessions on page 671
■
Configuring Service Manager Statistics on page 680
■
Service Manager Performance Considerations on page 684
■
Service Definition Examples on page 684
Service Manager Overview
The JUNOSe Service Manager application provides authentication, service selection,
and service activation and deactivation to subscribers. The application also collects
accounting information and statistics, and monitors subscriber and service sessions.
Service Manager supports two client types—RADIUS and CLI. Service Manager starts
when it receives a request from a RADIUS or CLI client. For RADIUS clients, RADIUS
Access-Accept messages and Change-of-Authorization-Request (CoA-Request)
Service Manager Overview
■ 635