Juniper JUNOSE 11.0.X MULTICAST ROUTING, Руководство по настройке

Страница: 697 / 788

Table 144: Service Manager RADIUS Attributes
VSA Description
RADIUS Message
Type
Attribute Name
Attribute
Number
Uniquely identifies the subscriber
session Access-Accept User-Name (used with
Virtual-Router, Juniper
Networks VSA 26-1) [1]
Uniquely identifies the subscriber
session Access-Accept Framed-IP-Address
(used with
Virtual-Router, Juniper
Networks VSA 26-1) [8]
Name of the service to be activated;
includes parameter values; a tagged
VSA Access-Accept and
CoA-Request Activate-Service [26-65]
Name of the service to be
deactivated
Note: This VSA is only used by CoA.
Access-Accept and
CoA-Request Deactivate-Service [26-66]
Number of MB of traffic that the
service can consume; the service is
terminated when output byte count
exceeds this value; a tagged VSA Access-Accept and
CoA-Request Service-Volume [26-67]
Number of seconds that the service
is to remain active; the service is
terminated when the time expires;
a tagged VSA Access-Accept and
CoA-Request Service-Timeout [26-68]
Statistics configuration; a tagged VSA:
0 = disable
1 = timestamp only
2 = timestamp and volume Access-Accept and
CoA-Request Service-Statistics [26-69]
Name of the service (including
parameter values) with which the
statistics are associated For service
sessions only:
Acct-Start
Acct-Stop
Interim-Acct Service-Session [26-83]
Number of seconds between
accounting updates for a service; a
tagged VSA Access-Accept and
CoA-Request Service-Interim-Acct-
Interval [26-140]
Uniquely identifies the subscriber
session Access-Accept Calling-Station-ID [31]
Accounting identifier that makes it
easy to match start and stop records
in a log file; the format is extended
to include a colon-separated value
that uniquely identifies the subscriber
session Acct-Start
Acct-Stop
Interim-Acct Acct-Session-ID [44]
Using RADIUS to Manage Subscriber Service Sessions
■ 657
Chapter 27: Configuring Service Manager