manualshive.com logo in svg

Juniper JUNOSE 11.0.X MULTICAST ROUTING, Руководство по настройке

Конфигурационный руководство для маршрутизации сети с мультикастом Juniper JUNOSE 11.0.X предоставляет пользовательские руководства для настройки. Вы можете скачать его бесплатно с нашего сайта. Узнайте как настроить подписку на manualshive.com!

Поделиться
Скачать
background image

RADIUS (Remote Authentication Dial-In User Service)

AAA failure...........................................................90
accounting methods..............................................18
attribute descriptions............................18, 165, 253
attributes supported............................................253
authentication and accounting servers..................18
authentication methods........................................18
Calling-Station-Id formats supported...................184
change of authority messages.............................235
CLI AAA messages..............................................184
client to server interaction....................................18
configuring servers...............................................18
description..........................................................165
direct server access...............................................18
disconnect messages..........................................235
EAP authentication...............................................18
IETF attributes supported....................................253
Juniper Networks VSAs supported.......................259
L2TP transmit connect speed..............................401
L2TP tunnel switch profiles, applying..................393
message types supported....................................167
RADIUS dynamic-request server.........................235
round-robin server access.....................................18
server access.........................................................18
server request processing limit.............................18
Service Manager attributes..................................657
Service Manager tags..........................................658
services...............................................................165
SNMP traps...........................................................33
system log messages............................................33
traffic shaping for PPP over ATM interfaces..........82
VSAs (vendor-specific attributes)

for dynamic IP interfaces...............................82
formats........................................................259

RADIUS attributes

preference order and

allocation of prefixes to IPv6 clients............104

radius commands........................................................18

radius acct-session-id-format.......................197, 255
radius algorithm..............................................18, 28
radius calling-station-delimiter....................184, 255
radius calling-station-format................184, 255, 343
radius client..........................................................28
radius connect-info-format..................................203
radius connect-info-format command.........370, 374
radius disconnect client......................................242
radius dsl-port-type.............................197, 203, 257
radius dynamic-request server............................242
radius ethernet-port-type............................203, 257
radius ignore atm-mbs........................................203
radius ignore atm-pcr..........................................203
radius ignore atm-scr..........................................203
radius ignore atm-service-category.....................203
radius ignore egress-policy-name........................203
radius ignore framed-ip-netmask........................184
radius ignore ingress-policy-name.......................203

radius ignore virtual-router.................................203
radius include

ANCP (L2C)-related Juniper Networks

VSAs........................................................229

radius include access-loop-parameters................203
radius include acct-authentic...............................197
radius include acct-delay-time.............................197
radius include acct-link-count..............................197
radius include acct-multi-session-id.....................197
radius include acct-session-id..............................197
radius include acct-session-id

access-request.................................................255

radius include acct-terminate-cause..............84, 197
radius include acct-tunnel-connection.................203
radius include ascend-num-in-multilink..............203
radius include called-station-id............................184
radius include calling-station-id...........................184
radius include class.............................................184
radius include connect-info.................................203
radius include delegated-ipv6-prefix...................184
radius include dhcp-gi-address............................203
radius include dhcp-mac-address........................203
radius include dhcp-options................................203
radius include

downstream-calculated-qos-rate......................225

radius include dsl-forum-attributes......................232
radius include egress-policy-name......................203
radius include event-timestamp..........................197
radius include framed-compression....................184
radius include framed-interface-id......................203
radius include framed-ip-add acct-start...............254
radius include framed-ip-addr.............................184
radius include framed-ip-netmask.........84, 184, 197
radius include framed-ipv6-pool..........................184
radius include framed-ipv6-prefix.......................203
radius include framed-ipv6-route........................184
radius include icr-partition-id..............................227
radius include ingress-policy-name.....................203
radius include input-gigapkts .............................203
radius include input-gigawords...........................197
radius include interface-description....................203
radius include ipv6-local-interface.......................184
radius include ipv6-nd-ra-prefix..........................184
radius include ipv6-primary-dns..........................184
radius include ipv6-secondary-dns......................184
radius include ipv6-virtual-router........................184
radius include l2c-downstream-data....................225
radius include l2c-upstream-data........................203
radius include l2tp-ppp-disconnect-cause............380
radius include mlppp-bundle-name.....................203
radius include nas-identifier................................196
radius include nas-port........................................184
radius include nas-port-id....................................203
radius include nas-port-type................................203
radius include output-gigapkts............................203
radius include output-gigawords.........................197

742

■

Index

JUNOSe 11.0.x Broadband Access Configuration Guide

Содержание JUNOSE 11.0.X MULTICAST ROUTING





















































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOSE 11.0.X MULTICAST ROUTING

KAPERSKY CORPORATE SUITE Manual preview
CORPORATE SUITE
Бренд: KAPERSKY Страницы: 36
American DJ myDMX 2.0 User Instructions preview
myDMX 2.0
Бренд: American DJ Страницы: 21
Nortel CC MIS User Manual preview
CC MIS
Бренд: Nortel Страницы: 374
HP PROLIANT 56976839 Release Notes preview
PROLIANT 56976839
Бренд: HP Страницы: 16
HP ProLiant Power Interface Control Utility User Manual preview
ProLiant Power Interface Control Utility
Бренд: HP Страницы: 10
HP ProBook 6450b User Manual preview
ProBook 6450b
Бренд: HP Страницы: 181
HP ProLiant SL160s Installation Instructions Manual preview
ProLiant SL160s
Бренд: HP Страницы: 8
HP ProDesk 600 Maintenance And Service Manual preview
ProDesk 600
Бренд: HP Страницы: 245
HP ProBook 6445b - Notebook PC User Manual preview
ProBook 6445b - Notebook PC
Бренд: HP Страницы: 183
HP ProLiant Lights Out-100 User Manual preview
ProLiant Lights Out-100
Бренд: HP Страницы: 60
HP StorageWorks 2/64 - Core Switch Command Reference Manual preview
StorageWorks 2/64 - Core Switch
Бренд: HP Страницы: 830
HP StorageWorks 2/64 - Core Switch Installation Manual preview
StorageWorks 2/64 - Core Switch
Бренд: HP Страницы: 166
HP ProBook 6360b Maintenance And Service Manual preview
ProBook 6360b
Бренд: HP Страницы: 157
HP ProBook 6445b - Notebook PC Maintenance And Service Manual preview
ProBook 6445b - Notebook PC
Бренд: HP Страницы: 230
Nokia Series 60 Manual preview
Series 60
Бренд: Nokia Страницы: 84
TeleType GPS WoldNav User Manual preview
WoldNav
Бренд: TeleType GPS Страницы: 64
TeleNav GPS Navigator v4.1 User Manual preview
GPS Navigator v4.1
Бренд: TeleNav Страницы: 29
SonicWALL OS 2.x Quick Start Manual preview
OS 2.x
Бренд: SonicWALL Страницы: 20

Бренды по названию

Популярные бренды

Загрузить еще бренды