manualshive.com logo in svg

Juniper JUNOSE 11.0.X MULTICAST ROUTING, Руководство по настройке

Конфигурационный руководство для маршрутизации сети с мультикастом Juniper JUNOSE 11.0.X предоставляет пользовательские руководства для настройки. Вы можете скачать его бесплатно с нашего сайта. Узнайте как настроить подписку на manualshive.com!

Поделиться
Скачать
background image

option (option 82). You can use the 

radius remote-circuit-id-format

 command to

configure the following nondefault formats for the PPPoE remote circuit ID value:

■

Include either or both of the agent-circuit-id (suboption 1) and agent-remote-id
(suboption 2) suboptions of the DHCP relay agent information option, with or
without the NAS-Identifier [32] RADIUS attribute.

■

Append the agent-circuit-id suboption value to an interface specifier that is
consistent with the recommended format in the DSL Forum Technical Report
(TR)-101—Migration to Ethernet-Based DSL Aggregation (April 2006).

For information about configuring the PPPoE remote circuit ID, see the 

Using the

PPPoE Remote Circuit ID to Identify Subscribers

 and 

Configuring PPPoE Remote Circuit

ID Capture

 sections in 

JUNOSe Link Layer Configuration Guide

 .

Using the Giaddr to Identify the Primary Interface for Dynamic Subscriber Interfaces

When creating dynamic subscriber interfaces, the router builds the dynamic interfaces
on the associated primary interface. By default, the router identifies the primary
interface based on the interface on which DHCP client discover packets are received.
The router then builds all dynamic interfaces on that primary interface.

In some cases you might want more control over the determination of the primary
interface and you might not want to use the primary interface that is determined by
the default behavior. The JUNOSe software enables you to configure DHCP relay to
use information in the giaddr in DHCP ACK messages to specify which interface is
to be used as the primary interface. This capability allows you to build dynamic
interfaces on the primary interface of your choice.

■

To use information in the giaddr to identify the primary interface for dynamic
subscriber interfaces:

host1(config)#

set dhcp relay giaddr-selects-interface

Configuring Layer 2 Unicast Transmission Method for Reply Packets to DHCP Clients

By default, DHCP relay and relay proxy broadcast DHCP Offer reply packets and
DHCP ACK and NAK reply packets to DHCP clients during the discovery process. In
some environments, this default broadcast method might be a security concern
because all clients can receive packets intended for all other clients.

You use the 

set dhcp relay layer2-unicast-replies

 command in Global Configuration

mode to configure the optional layer 2 unicast and layer 3 broadcast transmission
method for DHCP relay and DHCP relay proxy. This method uses the client’s layer
2 (MAC) address and layer 3 (IP) broadcast address to provide secure transmission
of DHCP Offer reply packets and ACK and NAK reply packets. The optional layer 2
unicast method enables reply packets to be broadcast through the layer 3 network
but received only by the specified client.

There are exceptions to this behavior for DHCP relay proxy when the DHCP client
is already bound to an IP address or is renewing the lease on its IP address. For
information, see “Behavior for Bound Clients and Address Renewals” on page 514.

496

■

Configuring DHCP Relay and BOOTP Relay

JUNOSe 11.0.x Broadband Access Configuration Guide

Содержание JUNOSE 11.0.X MULTICAST ROUTING





















































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOSE 11.0.X MULTICAST ROUTING

Canon iR2270 Series Product Description preview
iR2270 Series
Бренд: Canon Страницы: 2
Canon Pixma Pro9500 Series Manual preview
Pixma Pro9500 Series
Бренд: Canon Страницы: 31
Canon PowerShot SD430 DIGITAL ELPH WIRELESS Software & Wireless Manual preview
PowerShot SD430 DIGITAL ELPH WIRELESS
Бренд: Canon Страницы: 130
Canon PowerShot SD880 IS Digital ELPH Software Starter Manual preview
PowerShot SD880 IS Digital ELPH
Бренд: Canon Страницы: 83
Canon Selphy CP600 Printer Software Manual preview
Selphy CP600
Бренд: Canon Страницы: 34
Canon N1240U - CanoScan Flatbed Scanner User Manual preview
N1240U - CanoScan Flatbed Scanner
Бренд: Canon Страницы: 109
Quantum GoVault 40GB User Manual preview
GoVault 40GB
Бренд: Quantum Страницы: 91
Vaisala Veriteq viewLinc 4.0 Administrator'S Manual preview
Veriteq viewLinc 4.0
Бренд: Vaisala Страницы: 168
NETGEAR GS110TP - ProSafe Gigabit Smart Switch Installation Manual preview
GS110TP - ProSafe Gigabit Smart Switch
Бренд: NETGEAR Страницы: 2
Alarm Lock User Access Control (UAC) in Windows® Vista Tech Note preview
User Access Control (UAC) in Windows® Vista
Бренд: Alarm Lock Страницы: 2
Olympus DS 20 - 128 MB Digital Voice Recorder Online Instructions Manual preview
DS 20 - 128 MB Digital Voice Recorder
Бренд: Olympus Страницы: 48
Intrinsyc Telephony Modem Simulator Brochure preview
Telephony Modem Simulator
Бренд: Intrinsyc Страницы: 2
Red Hat APPLICATION STACK 1.1 RELEASE Release Note preview
APPLICATION STACK 1.1 RELEASE
Бренд: Red Hat Страницы: 30
Adaptec Disk Array Administrator User Manual preview
Disk Array Administrator
Бренд: Adaptec Страницы: 139
Juniper TePM Agent Release Note preview
TePM Agent
Бренд: Juniper Страницы: 9
Nikon DI series Manual (Install To Pc) preview
DI series
Бренд: Nikon Страницы: 12
Autodesk 00308-011408-9F30A - VLA AUTOSKETCH R8-MEDIA W9X/NT User Manual preview
00308-011408-9F30A - VLA AUTOSKETCH R8-MEDIA W9X/NT
Бренд: Autodesk Страницы: 400
FieldServer FS-8700-52 Driver Manual preview
FS-8700-52
Бренд: FieldServer Страницы: 17

Бренды по названию

Популярные бренды

Загрузить еще бренды