Figure 24: IP over Ethernet Dynamic Subscriber Interface Configuration
Configuring Dynamic Subscriber Interfaces over VLANs
To configure a dynamic subscriber interface in an IP over VLAN over Ethernet
configuration by using DHCP events, perform the following steps:
1.
Configure the DHCP server.
For instructions, see “Configuring the DHCP Local Server” on page 471 .
2.
Specify a Fast Ethernet, Gigabit Ethernet, or 10-Gigabit Ethernet port.
host1(config)#
interface gigabitEthernet 1/0
3.
Specify VLAN as the encapsulation method on the interface. This command
creates the VLAN major interface.
host1(config-if)#
encapsulation vlan
4.
Create a VLAN subinterface by adding a subinterface number to the interface
identification command.
host1(config-if)#
interface gigabitEthernet 1/0.1
5.
Assign a unique VLAN ID to the VLAN subinterface.
host1(config-if)#
vlan id 101
6.
Create the primary IP interface by assigning an IP address and mask to the VLAN
subinterface (or make it unnumbered).
host1(config-if)#
ip address 192.168.2.10 255.255.255.0
7.
Configure the primary IP interface to enable dynamic creation of subscriber
interfaces.
host1(config-if)#
ip auto-configure ip-subscriber
8.
(Optional) Specify the source address of traffic that is destined for the primary
IP interface.
host1(config-if)#
ip source-prefix 192.168.2.10 255.255.255.0
Figure 25 on page 618 shows the interface stack built for this configuration.
Configuring Dynamic Subscriber Interfaces
■
617
Chapter 25: Configuring Subscriber Interfaces
Содержание JUNOSE 11.0.X MULTICAST ROUTING
