IS-IS. Make sure the route map you specify includes the
set tag
command that defines
a tag value for the routes destined for IS-IS. For details about configuring and using
route maps, see
JUNOSe IP Services Configuration Guide
.
To redistribute IPv6 routes, issue the
redistribute
command from within the IS-IS
IPv6 address family.
access-list
route-map
■
Use the
access-list
command to create a standard or extended access list.
■
Use the
route-map
command to create a route map.
■
For detailed information about configuring access lists and route maps, see
JUNOSe IP Services Configuration Guide
.
■
Example—For IP route redistribution the access list filters IP routes; for IPv6
route redistribution, the access list must filter IPv6 routes.
1.
Configure three static routes:
host1(config)#
ip route 10.20.20.0 255.255.255.0 192.168.1.0
host1(config)#
ip route 10.20.21.0 255.255.255.0 192.168.1.0
host1(config)#
ip route 10.21.0.0 255.255.255.0 192.168.1.0
2.
Configure an access list with filters on routes 10.20.20.0/24 and
10.20.21.0/24:
host1(config)#
access-list boston permit 10.20.0.0 0.0.255.255
3.
Configure a route map that matches the previous access list and applies an
internal metric type:
host1(config)#
route-map 1
host1(config-route-map)#
match ip address 1
host1(config-route-map)#
set metric-type internal
4.
Configure redistribution into IS-IS of the static routes with route map 1:
host1(config)#
router isis testnet
host1(config-router)#
redistribute static ip route-map 1
5.
Use the
show isis database
command to verify the effect of the redistribution
(that two static routes matching the route map are redistributed as level 2
internal routes):
host1#
show isis database detail l2
IS-IS Level-2 Link State Database
LSPID LSP Seq Num LSP Checksum LSP Holdtime ATT/P/OL
0000.0000.6666.00-00 0x000002B7 0x3E1F 1198 0/0/0
Area Address: 47.0005.80FF.F800.0000.0001.0001
NLPID: 0xcc
IP Address: 192.168.1.105
Metric: 10 IS 0000.0000.6666.01
Metric: 10 IS 0000.0000.3333.00
Metric: 10 IS 0000.0000.7777.00
360
■
Configuring Global IS-IS Parameters
JUNOSe 11.0.x IP, IPv6, and IGP Configuration Guide
Содержание IGP - CONFIGURATION GUIDE V11.1.X
