Juniper IGP - CONFIGURATION GUIDE V11.1.X, Руководство по настройке

Страница: 204 / 454

■
Valid lifetime—Amount of time in seconds that the router advertises the
IPv6 prefix as valid
■
preferred lifetime—Amount of time in seconds that the router advertises the
specified IPv6 prefix as preferred
■
Example 1
host1# show ipv6 routers
Router FE80::83B3:60A4 on FastEthernet2/0, last update 3 min
Hops 0, Lifetime 6000 sec, AddrFlag=0, OtherFlag=0
Reachable time 0 msec, Retransmit time 0 msec
Prefix 3FFE:C00:8007::800:207C:4E37/96 autoconfig
Valid lifetime -1, preferred lifetime -1
Router FE80::290:27FF:FE8C:B709 on FastEthernet2/1, last update 0 min
Hops 64, Lifetime 1800 sec, AddrFlag=0, OtherFlag=0
Reachable time 0 msec, Retransmit time 0 msec
■
Example 2
host1# show ipv6 routers conflicts
Router FE80::203:FDFF:FE34:7039 on FastEthernet1/0, last update 1 min,
CONFLICT
Hops 64, Lifetime 1800 sec, AddrFlag=0, OtherFlag=0
Reachable time 0 msec, Retransmit time 0 msec
Prefix 2003::/64 onlink autoconfig
Valid lifetime -1, preferred lifetime -1
■
See show ipv6 routers
show ipv6 static
■
Use to display the status of static routes in the routing table.
■
You can specify an IP mask that filters specific routes.
■
Field descriptions
■
Prefix—IP address prefix
■
Length—Prefix length
■
Next Hop—IP address of the next hop
■
Dst—Administrative distance of the route
■
Met—Number of hops
■
Interface—Interface type and interface specifier
■
Example
host1# show ipv6 static
Prefix/Length NextHop Dst/Met Interface
-------------------- -------------------- ------- ------------------
180 ■
Monitoring IPv6
JUNOSe 11.0.x IP, IPv6, and IGP Configuration Guide