Juniper IGP - CONFIGURATION GUIDE V11.1.X, Руководство по настройке

Страница: 69 / 454

Use to remove the IP configuration from an interface or subinterface and disable
IP processing on the interface.
■
■
Example
host1(config-if)# no ip interface
■
See no ip interface
Clearing IP Routes
The router enables you to clear the specified routing entries from the routing table.
You must specify the IP address prefix and the mask of the IP address prefix to clear
specific routes. You can later reinstall the routes you have cleared.
clear ip routes
■
Use to clear specified IP routes according to an IP prefix or a VPN routing and
forwarding (VRF) table.
■
Use an asterisk (*) to clear all dynamic routes from the routing table.
■
Example
host1# clear ip routes *
■
There is no no version.
■
See clear ip routes
ip refresh-route
■
Use to enable the owning protocols (BGP, IS-IS, OSPF) to reinstall routes removed
from the IP routing table by the
clear ip routes command.
■
Example
host1# ip refresh-route
■
There is no no version.
■
See ip refresh-route
Clearing IP Interfaces
The router enables you to clear the counters on one or more specified IP interfaces.
clear ip interface
■
Use to clear a specified IP interface.
■
Example
host1# clear ip interface pos 2/0
IP Routing
■ 45
Chapter 1: Configuring IP