Juniper IGP - CONFIGURATION GUIDE V11.1.X, Руководство по настройке

Страница: 136 / 454

■
TCP Session Statistics Sent:
■
total pkts—Total number of packets sent on the TCP connection
■
data pkts—Number of data packets sent on the TCP connection
■
bytes—Number of bytes sent on the TCP connection
■
retransmitted pkts—Number of packets retransmitted on the TCP
connection
■
retransmitted bytes—Number of bytes retransmitted on the TCP
connection
■
TCP Session Statistics Rcvd:
■
total pkts—Total number of packets received on the TCP connection
■
in-sequence pkts—Number of packets received in sequence on the TCP
connection
■
bytes—Number of bytes received on the TCP connection
■
chksum err pkts—Number of checksum error packets received on the
TCP connection
■
bad offset pkts—Number of bad offset packets received on the TCP
connection
■
short pkts—Number of short packets received on the TCP connection
■
duplicate pkts—Number of duplicate packets received on the TCP
connection
■
out of order pkts—Number of packets received out of order on the TCP
connection
■
Diagnostics: PRU_ Operations counters—Number of calls for each of the
indicated PRU_operations within the TCP service API. These are
per-connection statistics.
■
Wildcard Matches—Number of packets received that matched this TCP
connection due to wildcard matching. Matching is expected for listening
server connections, such as Telnet, but is not expected for established
connections. This is a per-connection statistic.
■
Rcv'd Packets after connection closed—Number of packets received on the
connection after the connection has been closed (and before the data
structure gets removed). This is a per-connection statistic.
■
Connect request rejected—Number of times an incoming connection request
was not approved. This is a per-connection statistic.
■
Connect request approval pending—Number of times that an incoming
connection request was held pending, waiting for a subsequent packet. This
is a per-connection statistic.
112 ■
Monitoring IP
JUNOSe 11.0.x IP, IPv6, and IGP Configuration Guide