manualshive.com logo in svg

Juniper IGP - CONFIGURATION GUIDE V11.1.X, Руководство по настройке

Конфигурационное руководство Juniper IGP - CONFIGURATION GUIDE V11.1.X предоставляет подробное руководство по настройке продукта. Скачайте бесплатно руководство на русском языке с manualshive.com. Получите все необходимые рекомендации и инструкции для успешной настройки вашего устройства.

Поделиться
Скачать
background image

mesh group, setting (IS-IS).........................................377
message digests.........................................................272
message-digest-key md5 command...........................294
metric

IS-IS global default..............................................364
IS-IS interface......................................................346
OSPF default.......................................................287
setting...................................................................29

metric commands

metric.................................................................364

metric-style commands

metric-style narrow.............................................365
metric-style transition.........................................365
metric-style wide................................................366

mpls commands

mpls spf-use-any-best-path (IS-IS).......................383
mpls spf-use-any-best-path (OSPF)......................290
mpls traffic-eng (IS-IS).........................................383
mpls traffic-eng area...........................................290
mpls traffic-eng router-id....................................290
mpls traffic-eng router-id (IS-IS)..........................383

MTU (maximum transmission unit)

IP......................................................................4, 24
IPv6....................................................................134
IS-IS....................................................................374
OSPF...................................................................257

multicast

addressing..............................................................8

multihomed hosts..........................................................4
multinetting.................................................................11

N

ND (neighbor discovery)

overview ............................................................193

neighbor commands

neighbor

OSPF...........................................................288
RIP..............................................................210

neighbor histories, OSPF............................................319
neighbor uptime tracking, OSPF................................319
neighboring routers, OSPF.................................244, 319
NET (network entity title)...........................327, 341, 344
net command............................................................342
network area command.............................................251
network commands

network..............................................................210

network entity title. 

See 

 NET

network interface layer (TCP/IP).....................................5
network layer addresses............................................328
network masks..............................................................9
network service access point. 

See 

 NSAP

network, OSPF routing...............................................263

next-hop verification

configuring

example........................................................31
steps for........................................................34

overview...............................................................31

no area command......................................................268
no ipv6 command......................................................151
nonbroadcast networks..............................................244
nonstop forwarding. 

See 

 graceful restart, IS-IS

not-so-stubby area, OSPF. 

See 

 NSSA

notice icons.................................................................xxi
NSAP (network service access point)..................327, 377
NSF (nonstop forwarding). 

See 

 graceful restart, IS-IS

nsf commands

nsf ietf................................................................379
nsf interface wait................................................381
nsf t1..................................................................381
nsf t2..................................................................382
nsf t3..................................................................382

NSSA (not-so-stubby area), OSPF.......................244, 267
null authentication, OSPF...........................................247

O

opaque LSAs, OSPF....................................................248
Open Shortest Path First. 

See 

 OSPF

operations-per-hop command......................................67
OSPF (Open Shortest Path First).................................241

ABRs...................................................................242
adjacency............................................................242
aggregate cost, optimizing..................................270
areas...........................................................257, 276
areas, defining....................................................246
AS boundary router.............................................243
authentication

MD5............................................................272
simple password..................................247, 272

autocost..............................................................278
automatic virtual links.........................................268
backbone area....................................................266
BGP and..............................................................248
BGP/MPLS VPNs and...........................................292
configuring

areas............................................................266
authentication..............................................272
incremental SPF..........................................299
interfaces.....................................................257
NBMA networks...........................................288
remote neighbors........................................292
traps............................................................299

creating interfaces..............................................251
database.............................................................302
dead interval.......................................................262
default cost.........................................................267
deleting interfaces...............................................251
domain...............................................................243

424

■

Index

JUNOSe 11.0.x IP, IPv6, and IGP Configuration Guide

Содержание IGP - CONFIGURATION GUIDE V11.1.X







































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для IGP - CONFIGURATION GUIDE V11.1.X

DAVIS WeatherLink Addendum preview
WeatherLink
Бренд: DAVIS Страницы: 20
Xerox Wide Format 6030 Release Note preview
Wide Format 6030
Бренд: Xerox Страницы: 8
Campbell PC208 Instruction Manual preview
PC208
Бренд: Campbell Страницы: 133
Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1 Installation Manual preview
NETWORK AND SECURITY MANAGER 2010.4 - REV1
Бренд: Juniper Страницы: 244
FARONICS POWER SAVE Manual preview
POWER SAVE
Бренд: FARONICS Страницы: 80
ASCOM DURAALARM - 1 Brochure preview
DURAALARM - 1
Бренд: ASCOM Страницы: 28
Sony D-NE1 - Portable Cd Player Specifications preview
D-NE1 - Portable Cd Player
Бренд: Sony Страницы: 2
COMPRO Y-C User Manual preview
Y-C
Бренд: COMPRO Страницы: 8
Ulead BD DISCRECORDER 2.7 User Manual preview
BD DISCRECORDER 2.7
Бренд: Ulead Страницы: 19
ZyXEL Communications NetAtlas Workgroup User Manual preview
NetAtlas Workgroup
Бренд: ZyXEL Communications Страницы: 242
Packet8 SoftalK User Manual preview
SoftalK
Бренд: Packet8 Страницы: 43
Genius NAVIGATOR 380 - Quick Start Manual preview
NAVIGATOR 380 -
Бренд: Genius Страницы: 26
Autodesk 15606-011408-9008 - MAPGUIDE R6.3 NAMED-100U PK User Manual preview
15606-011408-9008 - MAPGUIDE R6.3 NAMED-100U PK
Бренд: Autodesk Страницы: 204
Livescribe Desktop 2.3.1 User Manual preview
Desktop 2.3.1
Бренд: Livescribe Страницы: 88
Ulead MEDIASTUDIO PRO 6.0 User Manual preview
MEDIASTUDIO PRO 6.0
Бренд: Ulead Страницы: 360
Palm Treo Pro Supplementary Manual preview
Treo Pro
Бренд: Palm Страницы: 46
MACROMEDIA FLASH MX 2004-LEARNING FLASH Manual preview
FLASH MX 2004-LEARNING FLASH
Бренд: MACROMEDIA Страницы: 122
IBM VIAVOICE 10-STANDARD EDITION User Manual preview
VIAVOICE 10-STANDARD EDITION
Бренд: IBM Страницы: 124

Бренды по названию

Популярные бренды

Загрузить еще бренды