Juniper IGP - CONFIGURATION GUIDE V11.1.X, Руководство по настройке

Страница: 343 / 454

Ospf heap total bytes allocated: 1000
Internal OSPF Statistics, allocation failures:
Neighbor allocation failures: 0
LSA allocation failures: 0
LSA HDR allocation failures: 0
DB Request allocation failures: 0
RTX allocation failures: 0
LS Ack allocation failures: 0
DD pkt allocation failures: 0
OSPF interface allocation failures: 0
OSPF general packet allocation failures: 0
■
See show ip ospf internal-statistics
■
See show ipv6 ospf internal-statistics
show ip ospf neighbors
■
See show ip ospf neighbors
show ipv6 ospf neighbors
■
Use to display information about OSPF neighbors on a per-interface basis.
■
Use the optional areaId or areaIdInt values, in the show ipv6 ospf neighbors
command, to specify an OSPFv3 area ID in either IP or decimal format.
■
You can use the history keyword with the show ip ospf neighbors command
to display a history of up to 10 events for all OSPF neighbors or a specific OSPF
neighbor. This neighbor uptime tracking feature is not available for OSPFv3. For
more information, see “Neighbor Uptime Tracking” on page 300.
■
Field descriptions
■
Neighbor ID—Neighbor’s router ID
■
Pri—Router priority of neighbor
■
State—OSPF neighbor’s state
■
DR—Designated router
■
BDR—Backup designated router
■
DR Other—Neighbor to a designated router or a backup designated
router
■
Dead Time—Interval since last hello packet from neighbor
■
Address—IP address of the neighbor’s interface
■
Intf ID—Interface ID of the neighbor’s interface
■
Interface—Name of the specified interface and its port number
■
Transition log—List of transitions events for a neighbor
■
Interface—Interface for the neighbor
■
Event—Transition event
Monitoring OSPF
■ 319
Chapter 5: Configuring OSPF